Micron
Micron
Grant Road East, Mumbai, Maharashtra
SEND SMS
SEND EMAIL

Arduino And Arduino Shields

Micron is a leading supplier and manufacturer of various types of shields for arduino.

2.4 Inch Touchsreen For Arduino Uno

2.4 Inch Touchsreen For Arduino Uno
  • 2.4 Inch Touchsreen For Arduino Uno
Get Best Quote
Approx. Price: Rs 350 / Piece

The 2.4″ Colour TFT display with micro SD card slot is now available as a SHIELD for Arduino UNO.

It has a four wire resistive touch screen, a micro SD card socket,a reset switch and a convenient arduino Uno shield footprint.

 

Features:

  • 2.4 inch LCD TFT display has Bright, 4 white-LED backlight . 
  • Colorful, 18-bit 262,000 different shades 
  • 4-wire resistive touch screen 
  • 240 x 320 resolution 
  • Spfd5408 controller with built in video RAM buffer 
  • 8 bit digital interface, plus 4 control lines 
  • Uses digital pins 5-13 and analog 0-3. Digital pins 2, 3 and analog 4 and 5 are available  for user defined purpose.. Pin 12 is available if  micro SD is not used. 
  • 5V compatible, can be used  with 3.3V or 5V logic 
  • Size: 71 x 52 x 7mm

 

       

 

Request
Callback
Yes! I am interested

3.5 Inch Touchscreen for Arduino Uno & Mega

3.5 Inch Touchscreen for Arduino Uno & Mega
  • 3.5 Inch Touchscreen for Arduino Uno & Mega
Get Best Quote
Approx. Price: Rs 900 / Piece

This TFT display is big (3.5" diagonal) bright (6 white-LED backlight) and colourful! 480x320 pixels with individual RGB pixel control, this has way more resolution than a black and white 128x64 display, and double our 2.8" TFT. As a bonus, this display has a resistive touch screen attached to it already, so you can detect finger presses anywhere on the screen.
Features:

  • 3.5" diagonal LCD TFT display
  • 320x480 resolution, 18-bit (262,000) color capable - our code uses only 16-bits since its faster.
  • 8 bit digital interface, plus 4 or 5 control lines (12 pins minimum) or SPI mode with 4 or 5 SPI data/control lines (4 pins minimum) - not including the touch screen.
  • 5V compatible! Use with 3.3V or 5V logic such as an Arduino
  • Onboard 3.3V @ 150mA LDO regulator
  • 6 white LED backlight with DC/DC constant-current boost. You can PWM dim the backlight
  • 1x20 headers for easy breadboarding
  • 4-wire resistive touchscreen
Request
Callback
Yes! I am interested

Arduino Mega CNC Shield (Ramps 1.4)

Arduino Mega CNC Shield (Ramps 1.4)
  • Arduino Mega CNC Shield (Ramps 1.4)
Get Best Quote
Approx. Price: Rs 475 / Piece

Ramps is short for reprap Arduino mega pololu shield, it is mainly designed for the purpose of using pololu stepper driven board (similar to 4988 driven board). Ramps can only work when connected to its mother board Mega 2560 and 4988/DRV8825. Owning to its stability in operation and great compatibility with most 3D printer (all reprap-model such as pursa i2 and i3). The combination of Ramps1.4 + MEGA2560 + A4988/DRV8825 is becoming a mainstream of DIY 3D printer control board.
Features:

  • Standard interfaces (as that of extruder)
  • Reserved GCI like I2C and RS232
  • MOSFET 3 MOSFET are applied to the heater/ fan and thermistor circuit.
  • Another 5A added to protect the component parts.
  • An 11A fuse is added to the hotbed
  • Support 5 stepper drive board
  • The adoption of Pin Header as pololu makes it more convenient to repair or change.
  • I2C and SPI are reserved for expanding
  • All the MOSFET can be controlled by PWM
  • Use the interface of servo motor to adjust the level of printing platform automatically.
  • Adding a SD module for SD ramps module.
  • LED can indicate the status of the heater (the open and close of MOS).
  • 2 stepper motor for Z axis in parallel.
  • Expandable to control other accessories.

 

Request
Callback
Yes! I am interested

Arduino Mega Case

Arduino Mega Case
  • Arduino Mega Case
Get Best Quote
Approx. Price: Rs 200 / Piece
Best Arclyic/Wodden case to protect your Arduino Mega from getting damaged.
Request
Callback
Yes! I am interested

Arduino Mega Sensor Shield

Arduino Mega Sensor Shield
  • Arduino Mega Sensor Shield
Get Best Quote
Approx. Price: Rs 240 / Piece

This mega sensor shield v2.0 allows you to hoop up the sensors directly to Arduino mega (2560) or Arduino mega(ADK) without the use of the breadboard. it also expand the mega with Bluetooth module communication interface ,SD card module communication interface, APC220 radio-frequency module communication interface, RB URF v1.1 ultrasonic sensor interface and ICSP interface. easy to use for extension.
Features:

  • PIN13 Stat Power LED indicator
  • Digital IO Ports D0-D53
  • Analog IO Ports A0-A15
  • Reset Button up to top
  • External Power In
  • SD Card Interface
  • Ultrasonic Interface
  • ISP Interface
  • Bluetooth Interface
  • APC220 Interface
  • Dimension:53.5mm * 100mm

Request
Callback
Yes! I am interested

Arduino Multi Functional Shield

Arduino Multi Functional Shield
  • Arduino Multi Functional Shield
Get Best Quote
Approx. Price: Rs 375 / Piece

The Multi Function Shield has a large range of features which makes it ideal for beginners who just want to experiment and learn, or just as a general purpose shield for more advanced uses. Besides the feature rich range of components fitted to the shield, there are also a range of expansion headers for convenient interfacing of external modules and components. The shield includes R3 type headers for easy connection to your Arduino board.

Features:

  • 4 digit 7-segment LED display module driven by two serial 74HC595's
  • 4 x surface mount LED's in a parallel configuration
  • 10K adjustable precision potentiometer
  • 3 x Independent push buttons
  • Piezo buzzer
  • DS18B20 temperature sensor interface
  • LM35 temperature sensor interface
  • Infrared receiver interface
  • Serial interface header for convenient connection to serial modules such as Bluetooth, wireless interface, voice module, a voice recognition module etc

 

Request
Callback
Yes! I am interested

Arduino Nano Expansion Board

Arduino Nano Expansion Board
  • Arduino Nano Expansion Board
Get Best Quote
Approx. Price: Rs 175 / Piece
This Nano Multi-Function expansion board is designed specially for Arduino Nano, solve the problem of wiring confusing when a variety of sensors connected.
Lead out all digital IO port and analog IO port, each one with standard positive and negative power interface.
Lead out the I2C interface of mainboard for convenient connection.
Increasing the DC power supply interface. Nano USB interface supply current is actually only 50MA, to bring high-current devices, such as the steering, is obviously insufficient. So in the DC power connector provide external power supply to ensure the stability of equipment operation
Request
Callback
Yes! I am interested

Arduino Servo Shield

Arduino Servo Shield
  • Arduino Servo Shield
Get Best Quote
Approx. Price: Rs 550 / Piece

The servo shield allows you to connect upto 20 servos to your SPDuino or other arduino-compatible boards .The selectable supply for the servos enables you to choose the supply either from the on-board regulator or any other suitable power source through the separate servo power terminals. Suitable for making arm robots, Hexapods and other servo based robots.
Features:

  • Provided with stackable headers
  • Reverse polarity protection
  • On board 5V, 2.2Amp regulator
  • Selectable on-board/separate power source for servos
  • Interfaces upto 20 hobby servos
  • Parallel connections available for pins 0-13, to drive servos in parallel (optional)
  • Input Voltage: 7-14V
  • Servo Input voltage: Recommended voltage as per servo manufacturer
  • Dimensions: 66.67mm x 71.12mm
  • Compatibility: SPDuino, Arduino Uno, and other similar Arduino-compatible boards

 

Request
Callback
Yes! I am interested

Arduino Uno & Mega Screw Shield

Arduino Uno & Mega Screw Shield
  • Arduino Uno & Mega Screw Shield
Get Best Quote
Approx. Price: Rs 400 / Piece

The Arduino Screw Shield is the ultimate breakout board for an Arduino. It combines a prototyping shield with a full set of 3.5mm screw terminal blocks. The screwshield part lets you build custom circuitry and then you can easily securely connect wires and sensors to the terminal blocks. Great for panel mounts, buttons, sensors, enclosures etc.

 The shield even comes with stacking headers, which let you plug another shield on top! Here, a L293D Breakout is stacked with the Arduino-screwshield.

Features:

  • Large high-quality PCB, specifically chosen for its excellent resistance to lots of soldering and desoldering (essential for prototyping boards)
  • Plenty of prototyping space, with power/ground rails
  • Diffused red power LED
  • Reset button
  • Full set of stacking female header pins
  • Lots of 3.5mm terminal blocks to fill 36 breakouts on the board

 

Request
Callback
Yes! I am interested

Arduino Uno - R3 - Original

Arduino Uno - R3 - Original
  • Arduino Uno - R3 - Original
Get Best Quote
Approx. Price: Rs 1,250 / Piece(s)

This is the new Arduino Uno R3 made in Italy with box. In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2 found on the Uno (or the FTDI found on previous generations). This allows for faster transfer rates and more memory. No drivers needed for Linux or Mac (inf file for Windows is needed and included in the Arduino IDE), and the ability to have the Uno show up as a keyboard, mouse, joystick, etc.

The Uno R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Uno R3 works with all existing shields but can adapt to new shields which use these additional pins.

Note: The Arduino Uno R3 requires the Arduino 1.0 drivers folder in order to install properly on some computers. We have tested and confirmed that the R3 can be programmed in older versions of the IDE. However, the first time using the R3 on a new computer, you will need to have Arduino 1.0 installed on that machine. If you are interested in reading more about the changes to the IDE, check out the official Arduino 1.0 Release notes!

Features:

  • ATmega328 microcontroller
  • Input voltage - 7-12V
  • 14 Digital I/O Pins (6 PWM outputs)
  • 6 Analog Inputs
  • 32k Flash Memory
  • 16Mhz Clock Speed
Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3days
Yes! I am interested

Arduino Uno Case

Arduino Uno Case
  • Arduino Uno Case
Get Best Quote
Approx. Price: Rs 150 / Piece
Best Acrylic/Wodden Case to protect your Arduino Uno board from getting damaged.
Request
Callback
Yes! I am interested

Arduino Uno Prototype Shield

Arduino Uno Prototype Shield
  • Arduino Uno Prototype Shield
Get Best Quote
Approx. Price: Rs 250 / Piece

This prototyping shield is the best out there (well, we think so, at least), and now is even better with Version R3 - updated for the most compatibility with just about all the Arduinos!

It works with UNO, Mega, Leonardo, NG, Diecimila, Duemilanove, and compatible Arduinos.


Features:

  • 1.0 Arduino Pinout
  • 1 ICSP Connector footprint
  • 2 LEDs and resistor footprint
  • IOREF and GND power lines
  • SPI signals pads
  • 24 pin SMD footprint (50 mils pitch)
Request
Callback
Yes! I am interested

Arduino Uno Sensor Shield

Arduino Uno Sensor Shield
  • Arduino Uno Sensor Shield
Get Best Quote
Approx. Price: Rs 200 / Piece

This Arduino Sensor Shield V5.0 sensor expansion board, the motherboard is not only extended out the Arduino Uno all digits and analog interface to servo line order form , but also add hoc IIC interface, servo controller interface, Bluetooth module communication interface, SD card module communication interface, APC220 radio frequency module communication interface, ultrasonic sensor interface, 12864 LCD serial and parallel interfaces, independent expansion will be more easy and convenient.
Features:

  • Support I2C interface
  • Support Servo Motor Drive Shield interface.
  • Support Bluetooth module communication interface.
  • Support SD card module communication interface.
  • Support RB URF v1.1 ultrasonic sensor interface
  • 32 servo controller interfaces
  • 128x64 LCD serial and parallel interface
Request
Callback
Yes! I am interested

Ethernet Shield W5110

Ethernet Shield W5110
  • Ethernet Shield W5110
Get Best Quote
Approx. Price: Rs 475 / Piece

The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100 ethernet chip.

The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top.

The shield contains a number of informational LEDs:

PWR: indicates that the board and shield are powered

LINK: indicates the presence of a network link and flashes when the shield transmits or receives data

FULLD: indicates that the network connection is full duplex 100M: indicates the presence of a 100 Mb/s network connection (as opposed to 10 Mb/s)

RX: flashes when the shield receives data

TX: flashes when the shield sends data COLL: flashes when network collisions are detected
Features:

  • Dimensions: 73mm x 54mm x 17mm (2.8in x 2.1in x 0.7in)
  • Weight: 26g / 1oz
Request
Callback
Yes! I am interested

Arduino Mega 2560 - Original

Arduino Mega 2560 - Original
  • Arduino Mega 2560 - Original
Get Best Quote
Approx. Price: Rs 2,900 / Piece(s)
We have gathered a huge customer base in this domain by presenting a comprehensive range of Arduino Mega 2560 R3 Board. This board module is easy to use. Users just power up and start communicating. The offered board is the most reliable and cost-effective device available in the domain. At our manufacturing unit, our engineers have designed the board adhering to international industry standards and using heavy cast material. Besides, clients can get the board from us at industry leading prices.

Features:
  • Support serial download
  • Support for external 3.3V - 12V DC power supply
  • Support 9V battery supply
  • ATmega2560 microcontroller
  • Input voltage - 7-12V
  • 54 Digital I/O Pins (14 PWM outputs)
  • 16 Analog Inputs
  • 256k Flash Memory
  • 16Mhz Clock Speed
Request
Callback
Yes! I am interested

LCD Keypad Shield

LCD Keypad Shield
  • LCD Keypad Shield
Get Best Quote
Approx. Price: Rs 250 / Piece

Product Details:

Display SizeLCD 16X2
Backlight ColorBLUE

This is a very popular LCD Keypad shield for Arduino or Freeduino board. It includes a 2x16 LCD display and 6 momentary push buttons. Pins 4, 5, 6, 7, 8, 9 and 10 are used to interface with the LCD. Analog Pin 0 is used to read the pushbuttons. The LCD shield supports contrast adjustment and backlit on/off functions. It also expands analog pins for easy analog sensor reading and display.

The LCD Keypad shield is developed for Arduino compatible boards, to provide a user-friendly interface that allows users to go through the menu, make selections etc. It consists of a 1602 white character blue backlight LCD. The keypad consists of 5 keys — select, up, right, down and left. To save the digital IO pins, the keypad interface uses only one ADC channel. The key value is read through a 5 stage voltage divider.

Features:

  • Operating Voltage:5V
  • 5 Push buttons to supply a custom menu control panel
  • RST button for resetting arduino program
  • Integrate a potentiometer for adjusting the backlight
  • Expanded available I/O pins
  • Expanded Analog Pinout with standard DFRobot configuration for fast sensor extension
  • Dimension: 80 x 58 mm

 

Request
Callback
Yes! I am interested

2.4" TFT LCD Shield Display Module for Arduino U

2.4 TFT LCD Shield Display Module for Arduino U
  • 2.4 TFT LCD Shield Display Module for Arduino U
Get Best Quote
Approx. Price: Rs 500 / Piece
Specifications:

  • 2.4 inch LCD TFT display
  • Bright, 4 white-LED backlight, on by default but you can connect the transistor to a digital pin for backlight control
  • Colorful, 18-bit 262,000 different shades
  • 4-wire resistive touchscreen
  • 240 x 320 resolution
  • Spfd5408 controller with built in video RAM buffer
  • 8 bit digital interface, plus 4 control lines
  • Uses digital pins 5-13 and analog 0-3. That means you can use digital pins 2, 3 and analog 4 and 5. Pin 12 is available if not using the micro SD
  • 5V compatible, use with 3.3V or 5V logic
  • Size: 71 x 52 x 7mm

Package included:

  • 1 x 2.4 inch TFT LCD Shield
Request
Callback


Additional Information:

  • Item Code: ShieldDisplayModule
Yes! I am interested

Arduino CNC Shield Version 3.0

Arduino CNC Shield Version 3.0
  • Arduino CNC Shield Version 3.0
Get Best Quote
Approx. Price: Rs 250 / Piece

The Arduino CNC Shield makes it easy to get your CNC projects up and running in a few hours. It uses opensource firmware on Arduino to control 4 stepper motors using 4 A4988 Stepper drivers, with this shield and the Arduino you can build all kinds of robotics or CNC projects including CNC routers,laser cutters and even pick&place machines.
Features:

  • GRBL 0.8c compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals u
  • 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
  • 2 x End stops for each axis (6 in total)
  • Spindle, Coolant enable and direction
  • Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825 and others)
  • Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping)
  • Compact design.
  • Stepper Motors can be connected with 4 pin molex connectors.
  • Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)
Request
Callback
Yes! I am interested

I / O PRO Shield

I / O PRO Shield
  • I / O PRO Shield
Get Best Quote
Approx. Price: Rs 300 / Piece

Arduino IO shield come up with on board motor driver, Buzzer, Indication LEDs and joystick. This board can be directly attached to Arduino UNO, Duemilanove.

Features :
  • On board LEDs.
  • On board Motor Driver.
  • Direct sensor interface.
  • On board Switches.
  • On board Joystick.
  • On board Buzzer with driver circuit.
  • Motor Input/Output connection.
  • Attaches directly to Arduino.
Request
Callback
Yes! I am interested

16 Channel Servo Shield

16 Channel Servo Shield
  • 16 Channel Servo Shield
Get Best Quote
Approx. Price: Rs 300 / Piece
This Motor Control Shield can control servos, steppers and DC motors with an Arduino. With this shield one can control 2 connections for 5V 'hobby' servos, up to 4 bi-directional DC motors and up to 2 stepper motors. The shield is a nice tidy platform for robotics with ability to control a variety of motors.

Features:
1) Controls 16 RC Servo motors
2) Arduino compatible mount shield
3) Dual power option
Request
Callback
Yes! I am interested

Arduino Uno Prototype Board

Arduino Uno Prototype Board
  • Arduino Uno Prototype Board
Get Best Quote
Approx. Price: Rs 250 / Piece

The Prototype Shield makes it easy for you to design custom circuits. You can easily solder TH or SMD ICs on the prototyping area to test them with your Arduino board. The SMD area is designed for a maximum of 24 pins SOIC integrated circuit and the TH area contains a lot of space for the needed components around your project. You can even stick a mini breadboard (not included) on the protoarea for solderless operation. The proto area includes also two power lines (IOREF and GND), two LEDs pads and SPI signals breakout pads for boards with SPI only on the ICSP header like Zero.

Features:

  • 1.0 Arduino Pinout
  • 1 ICSP Connector footprint
  • 2 LEDs and resistor footprint
  • IOREF and GND power lines
  • SPI signals pads
  • 24 pin SMD footprint (50 mils pitch)

 

Request
Callback
Yes! I am interested

Arduino Uno R3 - Imported

Arduino Uno R3 - Imported
  • Arduino Uno R3 - Imported
Get Best Quote
Approx. Price: Rs 450 / Piece

This is the new Arduino Uno R3. In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2 found on the Uno (or the FTDI found on previous generations). This allows for faster transfer rates and more memory. No drivers needed for Linux or Mac (inf file for Windows is needed and included in the Arduino IDE), and the ability to have the Uno show up as a keyboard, mouse, joystick, etc.

The Uno R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Uno R3 works with all existing shields but can adapt to new shields which use these additional pins.

Arduino is an open-source physical computing platform based on a simple i/o board and a development environment that implements theProcessing/Wiring language. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP). The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux).

Note: The Arduino Uno R3 requires the Arduino 1.0 drivers folder in order to install properly on some computers. We have tested and confirmed that the R3 can be programmed in older versions of the IDE. However, the first time using the R3 on a new computer, you will need to have Arduino 1.0 installed on that machine. If you are interested in reading more about the changes to the IDE, check out the official Arduino 1.0 Release notes!

Features:

  • ATmega328 microcontroller
  • Input voltage - 7-12V
  • 14 Digital I/O Pins (6 PWM outputs)
  • 6 Analog Inputs
  • 32k Flash Memory
  • 16Mhz Clock Speed

 

Request
Callback
Yes! I am interested

Arduino Mega 2560 R3 - Imported

Arduino Mega 2560 R3 - Imported
  • Arduino Mega 2560 R3 - Imported
Get Best Quote
Approx. Price: Rs 800 / Piece

The Arduino Mega is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.

The Mega 2560 R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Mega 2560 R3 works with all existing shields but can adapt to new shields which use these additional pins.

Features:

  • ATmega2560 microcontroller
  • Input voltage - 7-12V
  • 54 Digital I/O Pins (14 PWM outputs)
  • 16 Analog Inputs
Request
Callback
Yes! I am interested

Arduino Pro Mini

Arduino Pro Mini
  • Arduino Pro Mini
Get Best Quote
Approx. Price: Rs 250 / Piece

The Arduino Pro Mini is a microcontroller board based on the ATmega328.

It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. A six pin header can be connected to an FTDI board to provide USB power and communication to the board.

The Arduino Pro Mini is intended for semi-permanent installation in objects or exhibitions. The board comes without pre-mounted headers, allowing the use of various types of connectors or direct soldering of wires. The pin layout is compatible with the Arduino Mini.

Features:

  • 14 Digital input / output port: RX, TX, D2 - D13
  • 8 analog inputs: A0 - A7
  • 1 pairs of ports TTL level serial transceiver: RX / TX
  • 6 PWM ports: D3, D5, D6, D9, D10, D11
  • Using Atmel AtMega328P-AU MCU
  • Support serial download
  • Support for external 3.3V - 12V DC power supply
  • Support 9V battery supply
  • Clock frequency: 16MHz
  • Size: 33.3 x 18.0mm

 

Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Arduino Nano CH340

Arduino Nano CH340
  • Arduino Nano CH340
Get Best Quote
Approx. Price: Rs 400 / Piece

Arduino Nano is a surface mount breadboard embedded version with integrated USB. It is a smallest, complete, and breadboard friendly. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper. Physically, it is missing power jack. The Nano is automatically sense and switch to the higher potential source of power, there is no need for the power select jumper.
Features: 

  • Microcontroller-Atmel ATmega328
  • Operating Voltage (logic level)-5 V
  • Input Voltage (recommended)-7-12 V
  • Input Voltage (limits)-6-20 V
  • Digital I/O Pins-14 (of which 6 provide PWM output)
  • Analog Input Pins-8
  • DC Current per I/O Pin-40 mA
  • Flash Memory-32 KB (of which 2KB used by bootloader)
  • SRAM-2 KB
  • EEPROM-1 KB
  • Clock Speed-16 MHz
  • Dimensions-0.70” x 1.70”

 

Request
Callback
Yes! I am interested

Arduino Leonardo

Arduino Leonardo
  • Arduino Leonardo
Get Best Quote
Approx. Price: Rs 550 / Piece

Arduino Leonardo

Arduino is an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing/Wiring language. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP). The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux).

The Leonardo is Arduino’s first development board to use one microcontroller with built-in USB. Using the ATmega32U4 as its sole microcontroller allows it to be cheaper and simpler. Also, because the 32U4 is handling the USB directly, code libraries are available which allow the board to emulate a computer keyboard, mouse, and more using the USB-HID protocol!

It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

Features:

 

  • ATmega32u4 Microcontroller
  • Input Voltage: 7-12V
  • 20 Digital I/O Pins
  • 7 PWM Channels
  • 12 ADCs
  • 16MHz Clock Speed
  • 32 KB Flash Memory
Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Arduino Motor Shield

Arduino Motor Shield
  • Arduino Motor Shield
Get Best Quote
Approx. Price: Rs 250 / Piece

The shield contains two L293D motor drivers and one 74HC595 shift register. The shift register expands 3 pins of the Arduino to 8 pins to control the direction for the motor drivers. The output enable of the L293D is directly connected to PWM outputs of the Arduino.

To increase the maximum current, the L293D allows extra chips with "piggyback". Piggyback is soldering one or two or three extra L293D drivers on top of the L293D drivers on the board to increase the maximum current. The L293D allows parallel operation.

The Motor Shield is able to drive 2 servo motors, and has 8 half-bridge outputs for 2 stepper motors or 4 full H-bridge motor outputs or 8 half-bridge drivers, or a combination.

 

The servo motors use the +5V of the Arduino board. The voltage regulator on the Arduino board could get hot. To avoid this, the newer Motor Shields have connection points for a separate +5V for the servo motors.

Request
Callback
Yes! I am interested

Arduino Mega 2560 Prototype Board

Arduino Mega 2560 Prototype Board
  • Arduino Mega 2560 Prototype Board
Get Best Quote
Approx. Price: Rs 300 / Piece

The Mega2560 Proto Shield V3 makes it easy for you to design custom circuits. You can solder parts to the prototyping area to create your project, or use it with a small solderless breadboard to quickly test circuit ideas without having to solder. It's got extra connections for all of the Arduino I/O pins, and it's got space to mount through-hole and surface mount integrated circuits. It's a convenient way to make your custom circuit and Arduino into a single module.

Features:

  • Wide prototyping area
  • Seamlessly plugged into the Arduino MEGA
  • Arduino pinout
  • Reset button
  • Indicator of power and status
  • Solder components directly
  • ICSP connector
  • 14 pin SMD footprint (50 mils pitch)

20 pin Through Hole footprint (100 mils pitch)

Package include:

1 x Mega 2560 1280 protoshield V3
1 x Mini breadboard

Request
Callback
Yes! I am interested

Arduino USB Host Shield ADK

Arduino USB Host Shield ADK
  • Arduino USB Host Shield ADK
Get Best Quote
Approx. Price: Rs 750 / Piece

The Arduino USB Host Shield allows you to connect a USB device to your Arduino board. The Arduino USB Host Shield is based on the MAX3421E, which is a USB peripheral/host controller containing the digital logic and analog circuitry necessary to implement a full-speed USB peripheral or a full-/low-speed host compliant to USB specification rev 2.0.

The following device classes are supported by the shield:
HID devices: keyboards, mice, joysticks, etc.

  • Game controllers: Sony PS3, Nintendo Wii, Xbox360.
  • USB to serial converters: FTDI, PL-2303, ACM, as well as certain cell phones and GPS receivers.
  • ADK-capable Android phones and tables.
  • Digital cameras: Canon EOS, Powershot, Nikon DSLRs and P S, as well as generic PTP.
  • Mass storage devices: USB sticks, memory card readers, external hard drives, etc.
  • Bluetooth dongles.

 

Request
Callback
Yes! I am interested

Data Logger Shield

Data Logger Shield
  • Data Logger Shield
Get Best Quote
Approx. Price: Rs 450 / Piece

The data logger shield has all the features of the popular, original, and is "R3" compatible so you can use it with just about any Arduino or compatible. You can be up and running with it in less than 15 minutes - saving data to files on any FAT16 or FAT32 formatted SD card, to be read by any plotting, spreadsheet or analysis program. The included RTC (Real Time Clock) can be used to timestamp all your data with the current time, so that you know precisely what happened when!
Features:

 

  • SD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents damage to your SD card
  • Real time clock (RTC) keeps the time going even when the Arduino is unplugged. The battery backup lasts for years
  • Included libraries and example code for both SD and RTC mean you can get going quickly
  • Prototyping area for soldering connectors, circuitry or sensors.
  • Onboard 3.3v regulator is both a reliable reference voltage and also reliably runs SD cards that require a lot of power to run
Request
Callback
Yes! I am interested
X
Looking for “Arduino And Arduino Shields”?


Reach Us
Saumil Tanna (Sales Team)
Shop No. 29/30, 2nd Floor, Yamuna Building Tara Temple Lane, Near Bombay Biscuit, Lamington Road, Grant Road East
Mumbai- 400007, Maharashtra, India


Call Us

Send E-mail

Send SMS