Micron
Micron
Grant Road East, Mumbai, Maharashtra
SEND SMS
SEND EMAIL

Driver Boards & Modules

Prominent & Leading Manufacturer from Mumbai, we offer esp8266 adapter plate, i2c serial interface module for lcd 1602, joystick module, lcd 1602 with i2c, mp1584 dc to dc 3a step down converter and irf 520 mosfet driver module.

ESP8266 Adapter Plate

ESP8266 Adapter Plate
  • ESP8266 Adapter Plate
Get Best Quote
Approx. Price: Rs 40 / Piece

The adaptor board converts the IO ports of ESP-12 to 2.54mm pitch pin headers, so it is easy for beginner to test ESP-12.

 

The user should firstly solder the ESP-12 to the adapter board, secondly solder the 3.3V regulator to the bottom of the adapter board, thirdly, solder the 1X8P pin header to the adapter board

Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

I2C Serial Interface Module for LCD 1602

I2C Serial Interface Module for LCD 1602
  • I2C Serial Interface Module for LCD 1602
Get Best Quote
Approx. Price: Rs 100 / Piece
This is a IIC serial interface module which can be attached to LCD 1602 to convert I2C or SPI serial signals to single channel,high performance UART.

Features

  • Supply voltage: 5V
  • the backlight and contrast is adjusted by potentiometer
  • Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable
  • Compatible for 1602 LCD
  • This is another great IIC/I2C/TWI/SPI Serial Interface
  • With this I2C interface module, you will be able to realize data display via only 2 wires.
  • If you already has I2C devices in your project, this LCD module actually cost no more resources at all.
  • It is fantastic for Arduino based project.
Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

Joystick Module

Joystick Module
  • Joystick Module
Get Best Quote
Approx. Price: Rs 150 / Piece

This is a Joystick module that has X,Y analog outputs and has a switch that detects button press. The joystick is made up of two passive potentio-meters (variable resistors) and a push button and therefore can be used at any standard voltage levels.

Applications

  • Joystick that can be interfaced with Arduino, Raspberry Pi, and other Microcontrollers and Embedded Boards
  • Joystick for custom designed/experimental RC planes, RC Cars
  • Joystick for CNC Machines or other industrial controls
  • Electronic games pads similar to PlayStation.
Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

LCD 1602 with I2C

LCD 1602 with I2C
  • LCD 1602 with I2C
Get Best Quote
Approx. Price: Rs 300 / Piece

This 16 character by 2 line display has a very clear and high contrast white text upon a blue background/backlight. It also includes a serial I2C/IIC adaptor board pre-soldered to the back of the LCD. This means it can be controlled with just 2 I2C serial data pins (SDA SCL) and so requires far less digital IO pins when controlled from a microcontroller. 

Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

MP1584 DC to DC 3A Step Down Converter

MP1584 DC to DC 3A Step Down Converter
  • MP1584 DC to DC 3A Step Down Converter
Get Best Quote
Approx. Price: Rs 130 / Piece

MP1584 DC-DC 3A Step Down Module converts input voltage between 4.5V and 28V into a smaller voltage between 0.8V and 18V, capable of driving a 3A load with excellent line and load regulation. This makes the fully compatible with setups from 2-6s. Simply turn the small screw to adjust the voltage.

These are perfect where space is a factor, or you don't want to add a whole PDB just to get 5v. Input must be >1.5V higher than output! The chip will get to high temperature protection mode when it work at a high-power conversion, without any cooling, it is able to output 3A current at 5V. But at higher output voltage, the current output capacity is lower than 3A, approx 2A.
Features:

  • Wide 4.5V to 28V Operating Input Range
  • Up to 92% Efficiency
  • Programmable Switching Frequency from 100kHz to 1.5MHz
  • High-Efficiency Pulse Skipping Mode for Ceramic Capacitor Stable
  • Internally Set Current Limit without a Current Sensing Resistor
  • Cycle-by-Cycle Over Current Protection
  • Input Under Voltage Lockout
  • Input Voltage: 4.5V-28VDC
  • Output Voltage: 0.8V-18VDC
  • Continuous Output Current: Max. 3A
  • Peek Output Current: 4A
  • Max. Efficiency: 92%
  • Output Ripple: 30mV
  • Switching Frequency: 100kHz to 1.5MHz
  • Operating Temperature: -40??? to +85???
  • Dimensions: 22mm*17mm*4mm

Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

IRF 520 Mosfet Driver Module

IRF 520 Mosfet Driver Module
  • IRF 520 Mosfet Driver Module
Get Best Quote
Approx. Price: Rs 130 / Piece

IFR520 MOSFET  module is designed to switch heavy DC loads from a single digital pin of your microcontroller. Its main purpose is to provide a low cost way to drive a DC motor for robotics applications, but the module can be used to control most high current DC loads. Screw terminals are provided to interface to your load and external power source. An LED indicator provides a visual indication of when your load is being switched. 

Features:

  • Weight: 10g
  • Size: 33.5 x 25.5mm
  • Max load (drain) current: <5A
  • Output load voltage :0-24V
  • Input Voltage: 3.3V, 5V

Applications: LED lights, DC motors, miniature pumps, solenoid valves.

 

Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

Bread Board Power Supply MB-102

Bread Board Power Supply MB-102
  • Bread Board Power Supply MB-102
Get Best Quote
Approx. Price: Rs 85 / Piece

This is a power supply module designed for MB102 breadboards.  MB 102 bread board power supply is a module that can take 6.5V to 12V input and can produce 3.3V and +5V. Its a must have product for experimenters those have to test/prototype electronic circuits on breadboard or perforated/veroboards.

Features

  • Breadboard power supply module, with 5 V, 3.3 V output voltages
  • Apply to MB102 Standard breadboard
  • Input voltage: 6.5-12 V (DC) or 5V USB power supply
  • Output voltage: 3.3V and 5V can switch over
  • Maximum output current: <700 ma
  • Input voltage ON/OFF switch
  • Independent control of upper and Lower Bread Board Power Rails. Can switch over to 0 V, 3.3 V, 5 V using jumpers on any rail.

 

Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

Ov7670 Camera Module Without Fifo

Ov7670 Camera Module Without Fifo
  • Ov7670 Camera Module Without Fifo
Get Best Quote
Approx. Price: Rs 420 / Piece

This is an Arduino camera module, adopted the Surveillance cameras digital image processing chip-OV0706, specially designed for image acquisition and processing application, based on TTL communication interface, very convenient to connect with Arduino controller, able to read image and data via UART serial port, and then perform some image processing.
Features:

  •  Optical size 1/6 inch
  • Resolution 640×480 VGA
  • Onboard regulator, only single 3.3V supply needed
  • Standard 0.1inch (2.54mm) pin pitch header connector
  • Mounted with high quality F1.8 / 6mm lens
  • Output support for Raw RGB, RGB (GRB 4:2:2, RGB565/555/444), YUV (4:2:2) and YCbCr (4:2:2) formats
  • High sensitivity for low-light operation
  • Low operating voltage for embedded portable apps
  • Standard SCCB interface compatible with I2C interface
  • Supports image sizes: VGA, CIF, and any size scaling down from CIF to 40×30
Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

Rotarty Encoder Module

Rotarty Encoder Module
  • Rotarty Encoder Module
Get Best Quote
Approx. Price: Rs 130 / Piece

The rotary encoder is a rotary input device (as in knob) that provides an indication of how much the knob has been rotated AND what direction it is rotating in.

It’s a great device for stepper and servo motor control.  You could also use it to control devices like digital potentiometers.

Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

PCA9685 16 Channel Servo Driver

PCA9685 16 Channel Servo Driver
  • PCA9685 16 Channel Servo Driver
Get Best Quote
Approx. Price: Rs 350 / Piece

Driving servo motors with the Arduino Servo library is pretty easy, but each one consumes a precious pin - not to mention some Arduino processing power.  The 16-Channel 12-bit PWM/Servo Driver will drive up to 16 servos over I2C with only 2 pins.  The on-board PWM controller will drive all 16 channels simultaneously with no additional Arduino processing overhead.  What's more, you can chain up to 62 of them to control up to 992 servos - all with the same 2 pins!

Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

Stepper Motor Driver 8825

Stepper Motor Driver 8825
  • Stepper Motor Driver 8825
Get Best Quote
Approx. Price: Rs 200 / Piece
This breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver features adjustable current limiting, over-current and over-temperature protection, and six microstep resolutions (down to 1/32-step). It operates from 8.2 V to 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling).
Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

Stepper Motor Driver A3967

Stepper Motor Driver A3967
  • Stepper Motor Driver A3967
Get Best Quote
Approx. Price: Rs 200 / Piece

The motor Driver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the  motor Driver). The motor Driver requires a 6V to 30V supply to power the motor and can power any voltage of stepper motor. The Driver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you’ve got precision motor control! It drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors.It provides much more flexibility and control over your stepper motor, when compared to older versions. The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution. The sleep and enable pins are also broken out for further control.
Features:

  • A3967 Microstepping Driver
  • MS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)
  • Compatible with 4, 6, and 8 wire stepper motors of any voltage
  • Adjustable current control from 150mA/phase to 700mA/phase
  • Power supply range from 6V to 30V. The higher the voltage, the higher the torque at high speed
Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

Stepper Motor A4988

Stepper Motor A4988
  • Stepper Motor A4988
Get Best Quote
Approx. Price: Rs 200 / Piece

The A4988 stepper motor driver carrier is a breakout board for Allegro’s easy-to-use A4988 microstepping bipolar stepper motor driver and is a drop-in replacement for the A4983 stepper motor driver carrier. The driver features adjustable current limiting, overcurrent protection, and five different microstep resolutions. It operates from 8 – 35 V and can deliver up to 2 A per coil.Features:

  • Simple step and direction control interface
  • Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step
  • Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates

 

Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

Stepper Motor Driver L9110

Stepper Motor Driver L9110
  • Stepper Motor Driver L9110
Get Best Quote
Approx. Price: Rs 150 / Piece

The L9110S 2-Channel motor driver module is a compact board that can be used to drive small robots. This module has two independent motor driver chips which can each drive up 800mA of continuous current. The boards can be operated from 2.5V to 12V enabling this module to be used with both 3.3V and 5V microcontrollers.

Features:

  • On-board 2 L9110 motor control chip
  • Module can be driven by two dc motors at the same time or one phase 4 line 2 type stepping motor
  • Input voltage: 2.5-12V DC
  • Each channel has a continuous output current 800 ma
  • PCB Size: 29.2mm x 23mm
Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

150W DC TO DC Boost Converter

150W DC TO DC Boost Converter
  • 150W DC TO DC Boost Converter
Get Best Quote
Approx. Price: Rs 275 / Piece

High Quality 150W DC - DC Boost Converter 10-32V To 12- 35V / 6A Step-Up Adjustable Power Supply

Features:
  • Module Properties: non-isolated step-up module (BOOST)
  • Input voltage :10-32V
  • Output voltage: 12-35V (adjustable)
  • Output Current: 10A (MAX)
  • Input Current: 16A (MAX) (Enhance heat dissipation for more than 10A)
  • Output power: natural cooling 100W (MAX), enhanced heat dissipation 150W (MAX)
  • Easy to drive 65W/90W dual-core notebook.
  • Use a 12V battery drive 19V, 3.42A notebook, the module temperature about 45°c
  • Conversion efficiency: 94%  (measured at Input 16V to output 19V 2.5A)
  • Output Ripple: 2% (MAX) 20M-bandwidth
  • Operating Temperature: Industrial (-40°c to +85°c) (ambient temperature exceeds 40°c, lower power use, or to enhance heat dissipation)
  • Full load temperature rise: 45°c
Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

5 Axis Stepper Motor Driver

5 Axis Stepper Motor Driver
  • 5 Axis Stepper Motor Driver
Get Best Quote
Approx. Price: Rs 450 / Piece

The latest upgraded 5 axis breakout board is specially designed for the CNC single axis 2-phase stepper driver controller, such as TB6560, M542, M542H, MA860H, 2M542, 2M982, DM542(A), DM860(A) etc. single axis stepper driver controller series. With this 5 axis breakout board, any 1-5 single axis stepper driver controllers can be directly controlled by the PC via the MACH3, EMC2, KCAM4, etc
Features :

  • Maximum support 5-axis stepper motor driver controllers 
  • Compatible with MACH3, Linux CNC (EMC2) etc. parallel-control CNC software. 
  • USB power supply and peripherals powered phase are separated to protect computer security. 
  • All the signals are opto-isolated which can protect your computer security. 
  • 5-input interface to define the Limit, Emergence-Stop, Cutter alignment, etc. 
  • Wide input voltage range: 12-24V, and with anti-reverse function. 
  • One relay output control interface, accessed by the spindle motor or the air pump, water pump, etc. 
  • Output 0-10V analog voltage for inverter to control the spindle speed.
Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

AMS 1117 3.3V Voltage Regulator

AMS 1117 3.3V Voltage Regulator
  • AMS 1117 3.3V Voltage Regulator
Get Best Quote
Approx. Price: Rs 90 / Piece

The AMS1117-3.3V voltage regulator module is great for your microcontroller projects and for various electronic prototypes. This is a high-performance module which provides a quick solution for powering your circuit.

Features:

§  Onboard AMS1117-3.3 chip

§  Input Voltage Range: 4.75 V to 12 V

§  Onboard power indicator

§  Board Size: 18.5 x 10.5 mm

Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

MP3 Module FN M16P

MP3 Module FN M16P
  • MP3 Module FN M16P
Get Best Quote
Approx. Price: Rs 250 / Piece

FN-M16P is a small and low price MP3 module with an simplified output directly to the speaker. The module can be used as a stand alone module with attached battery, speaker and push buttons or used in combination with any microcontroller, Arduino or any other with RX/TX capabilities.
Features:

  • Supports MP3 and WAV decoding. 
  • Supports FAT16 and FAT32 file system.
  • 24-bit DAC output and supports dynamic range 90dB and SNR 85dB.
  • Supports AD key control mode and UART RS232 serial control mode.
  • Supports maximum 32GB micro SD card and 32GB USB flash drive.
  • Supports maximum 3000 audio files under the root directory of the storage device.
  • Supports maximum 99 folders, and each folder can stores 255 audio files.
  • Supports inter-cut advertisements.
  • Supports random playback.
  • Built-in a 3 watts amplifier that can direct drive a 3 watts speaker.
  • 30 levels adjustable volume, and 6 levels adjustable EQ

 

Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

XL 6009 DC to DC Step Up Converter

XL 6009 DC to DC Step Up Converter
  • XL 6009 DC to DC Step Up Converter
Get Best Quote
Approx. Price: Rs 175 / Piece
This module is a non-isolated step-up (boost) voltage converter featuring adjustable output voltage and high efficiency.It is a 4 a switch current high-performance step-up (BOOST) module. The XL6009E1 module uses the second generation of high frequency switch technology as the core chip, LM2577 performance far beyond the first generation of technology. XL6009 booster module cost is lower and the performance is more outstanding.
Fetures:
  • Low ultra wide input voltage 3 v ~ 32 v, the best is 5 ~ 32 v working voltage range
  • Low ultra wide output voltage 5 v ~ 35 v
  • Built-in 4 a efficient Mosfet switch tube, make efficiency up to 94 percent (LM2577 current only 3 a)
  • High switching frequency, 400 KHZ, can use the small capacity of the filter capacitor can achieve very good effect, ripple smaller and smaller
  • Operating Temperature: -40 ~+85
Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

High Current Motor Driver

High Current Motor Driver
  • High Current Motor Driver
Get Best Quote
Approx. Price: Rs 200 / Piece(s)
The high-power motor driver is a compact motor driver. Ideal for use with heavy duty motors like wiper, power window motors and more. All you need to add is a micro-controller or other control circuit to turn the H-Bridge on and off.
Features:
  • The current rating of this board is about 5A ideal for heavy duty motors.
  • The maximum input voltage in this board is 24V.
  • One motor can be connected into this H-bridge motor driver.
  • If you are using two separate supply source for logic and motor supply then you have to match the ground for both the supplies.
Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

L293D Motor Driver Board

L293D Motor Driver Board
  • L293D Motor Driver Board
Get Best Quote
Approx. Price: Rs 200 / Piece(s)
This is L293D based H-Bridge motor driver board for driving DC motors and is ideal for robotics applications.
Features:
  • Operating Voltage: 4.5V to 30V DC.
  • 4 channel output (can drive 2 DC motors directionally)
  • 600mA output current capability per channel.
  • PTR connectors for easy connections.
  • User accessible Motor Enable PINs facility.
Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

L298 Motor Driver Board

L298 Motor Driver Board
  • L298 Motor Driver Board
Get Best Quote
Approx. Price: Rs 200 / Piece
It is a high voltage, high current dual full-bridge driver designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC and stepper motors.
Two enable inputs are provided to enable or disable the device independently of the input signals. An additional supply input is provided so that the logic works at the lower level.
Features:
  • Operating supply voltage up to 46V
  • Total Dc current up to 4amp (each channel can carry up to 2amp)
  • Low saturation voltage
  • Over temperature protection
  • Logical ”0” input voltage up to 1.5 v (high noise immunity)
  • PTR connector for easy connection.
Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

2000W Thyristor Module

2000W Thyristor Module
  • 2000W Thyristor Module
Get Best Quote
Approx. Price: Rs 200 / Piece

Use this module to control dimming/speed of 240V Appliances. It is a high power module capable of controlling any load that consumes up to 2000W of power. It is simple to set up and use. To use the module, just connect module in series with the appliance you plan to control and you may vary the speed of the appliance by turning the onboard knob.
Features:

  • Operating Voltage:220V
  • Maximum Power:2000W
  • Adjustable Voltage:0-220V
  • AC frequencys:50-60Hz
  • Size(LxWxH):Approx. 48 x 54 x 27mm
  • Material:Plastic,metal 

 

Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

Dual Channel Stepper Motor Driver L9110

Dual Channel Stepper Motor Driver L9110
  • Dual Channel Stepper Motor Driver L9110
Get Best Quote
Approx. Price: Rs 150 / Piece
DUAL CHANNELSTEPPER MOTOR DRIVER L9110

The L9110S 2-Channel motor driver module is a compact board that can be used to drive small robots. This module has two independent motor driver chips which can each drive up 800mA of continuous current. The boards can be operated from 2.5V to 12V enabling this module to be used with both 3.3V and 5V microcontrollers. A set of female header pins is used to connect this module to a microcontroller. The motors are attached via two sets of screw terminals. A PWM Pulse Width Modulation signal is used to control the speed of a motor and a digital output is used to change its direction. This module can also be used to drive a single four line two phase stepper motor. Four holes make this board easy to mount onto your robot or other project.

Specifications:

· On-board 2 L9110 motor control chip
· Module can be driven by two dc motors at the same time or one phase 4 line 2 type stepping motor
· Input voltage: 2.5-12V DC
· Each channel has a continuous output current 800 ma 

Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

Stepper Motor Driver

Stepper Motor Driver
  • Stepper Motor Driver
Get Best Quote
Approx. Price: Rs 150 / Piece(s)
If your stepper motor has a high current rating then it’s better to use this board for driving your stepper motor. The resistors are used for limiting the current and the diodes are used to avoid back EMF.

Specifications:
  • Easy interfacing to Microcontroller.
  • Motor Supply up-to 50VDC.
  • PTR connector for interfacing of Motor to Board.
  • Protection diode.
Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

Battery Charger Module

Battery Charger Module
  • Battery Charger Module
Ask For Price
X

Explore more products

Looking for “Driver Boards & Modules”?


Reach Us
Heena Jain (Marketing Executive)
Shop No. 29/30, 2nd Floor, Yamuna Building Tara Temple Lane, Near Bombay Biscuit, Lamington Road, Grant Road East
Mumbai- 400007, Maharashtra, India



Call Us

Share Us

F GT L


Send E-mailSend SMS