Micron
Micron
Grant Road East, Mumbai, Maharashtra
SEND SMS
SEND EMAIL

Motor Driver Boards & Modules

Prominent & Leading Wholesale Trader from Mumbai, we offer esp8266 adapter plate, i2c serial interface module for lcd 1602, joystick module, lcd 1602 with i2c, mp1584 dc to dc 3a step down converter and irf 520 mosfet driver module.

ESP8266 Adapter Plate

ESP8266 Adapter Plate
  • ESP8266 Adapter Plate
  • ESP8266 Adapter Plate
  • ESP8266 Adapter Plate
Get Best Quote
Approx. Price: Rs 40 / Piece
We are the leading suppliers for ESP8266 Adaptor Plate. This Adapter Plate is for ESP-07 ESP-08 ESP-12, a test board with IO lead out.
Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

I2C Serial Interface Module for LCD 1602

I2C Serial Interface Module for LCD 1602
  • I2C Serial Interface Module for LCD 1602
  • I2C Serial Interface Module for LCD 1602
Get Best Quote
Approx. Price: Rs 100 / Piece

Product Details:

Input Voltage (Volt)5
Size54 x 19 mm(max) / 1.62" x 0.57"
Net Weight5 g

We are the leading suppliers for I2C Serial Interface module. The backlight and contrast is adjusted by potentiometer.
Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable.
Compatible for 1602 LCD.

Features:
  • This is another great IIC/I2C/TWI Serial Interface.
  • With this I2C interface module, you will be able to realize data display via only 2 wires.
  • If you already has I2C devices in your project, this LCD module actually cost no more resources at all.
  • It is fantastic for Arduino based project.
Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

Joystick Module

Joystick Module
  • Joystick Module
  • Joystick Module
Get Best Quote
Approx. Price: Rs 150 / Piece

Product Details:

Supply Voltage3.3V to 5V
InterfaceAnalog x2,Digital x1
PH2.0 Interface
Size35x39 mm
Weight15 g

We are the leading suppliers for Joystick Module. Lots of robot projects need joystick. This joystick module for arduino provides a affordable solution to that. Simply connect to two analog inputs, the robot is at your commands with X,Y control. It also has a switch that is connected to a digital pin. This joystick module can be easily connect to Arduino by IO Expansion Shield For Arduino(V5) (SKU: DFR0088) with supplied cables.
Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

LCD 1602 with I2C

LCD 1602 with I2C
  • LCD 1602 with I2C
Get Best Quote
Approx. Price: Rs 300 / Piece

Product Details:

Size27.7mmx42.6mm
InterfaceI2c
I Two C Address0x27
Pin DefinitionVCC,GND, SDA, SCL
Voltage5 V

We are the leading suppliers for LCD 1602 with I2C. This is another great blue/yellow backlight LCD display. As the pin resources of Arduino controller is limited, your project may be not able to use normal LCD shield after connected with a certain quantity of sensors or SD card. However, with this I2C interface LCD module, you will be able to realize data display via only 2 wires. If you already has I2C devices in your project, this LCD module actually cost no more resources at all. It is fantastic for Arduino based project.

Features:
  • Only employ two I/O interface
  • Back lit (Green with white char color)
  • Contrast Adjust : Through Potentiometer
Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

MP1584 DC to DC 3A Step Down Converter

MP1584 DC to DC 3A Step Down Converter
  • MP1584 DC to DC 3A Step Down Converter
  • MP1584 DC to DC 3A Step Down Converter
Get Best Quote
Approx. Price: Rs 130 / Piece

Product Details:

Current3A
Input DC Voltage4.5-28V
Output DC Voltage3.3VDC+-2%V
Size0.87 in x 0.63 in x 0.16 in (2.2 cm x 1.6 cm x 0.4 cm
Weight1.9 g

we Are the leading traders for MP1584 DC TO DC 3A STEP DOWN CONVERTER. This is a mini DC-DC step-down power module based on MP1584 and it output fixed 3.3V. It is small size, light weight, especially for model airplanes, smart car, Arduino DIY and other items.
Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

IRF 520 MOSFET Driver Module

IRF 520 MOSFET Driver Module
  • IRF 520 MOSFET Driver Module
  • IRF 520 MOSFET Driver Module
Get Best Quote
Approx. Price: Rs 130 / Piece

Product Details:

CurrentBetter than 5A
Size33.5 x 25.5mm
Voltage (V)0-24V
Weight10 g
Input Voltage3.3V, 5V

We are the leading suppliers for IRF 520 Mosfet Driver Module. This little module is a breakout board for the IFR520 MOSFET transistor. The module is designed to switch heavy DC loads from a single digital pin of your microcontroller. Its main purpose is to provide a low cost way to drive a DC motor for robotics applications, but the module can be used to control most high current DC loads. Screw terminals are provided to interface to your load and external power source. An LED indicator provides a visual indication of when your load is being switched.
Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

Bread Board Power Supply MB-102

Bread Board Power Supply MB-102
  • Bread Board Power Supply MB-102
  • Bread Board Power Supply MB-102
Get Best Quote
Approx. Price: Rs 85 / Piece

Product Details:

Input Voltage6.5-12 V (DC) or USB power supply
Output Voltage3.3V/5V can switch over
Max CurrentBetter than 700 ma
Size53 x 32 x 23 mm

We are the leading suppliers for Breadboard Power Supply. This is a power supply module designed for MB102 breadboards. MB 102 bread board power supply is a module that can take 6.5V to 12V input and can produce 3.3V and +5V. Its a must have product for experimenters those have to test/prototype electronic circuits on breadboard or perforated/veroboards.

Specifications:
  • Breadboard power supply module, compatible with 5V, 3.3V.
  • Apply to MB102 breadboard
  • Fluctuation two road independent control, can switch over to 0 V, 3.3 V, 5 V
  • On-board two groups of 3.3V, 5V DC output plug pin, convenient external lead use.
Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

Ov7670 Camera Module Without Fifo

Ov7670 Camera Module Without Fifo
  • Ov7670 Camera Module Without Fifo
Get Best Quote
Approx. Price: Rs 420 / Piece
We are the leading Suppliers for OV7670 camera Module..This is an Arduino camera module, adopted the Surveillance cameras digital image processing chip-OV0706, specially designed for image acquisition and processing application, based on TTL communication interface, very convenient to connect with Arduino controller, able to read image and data via UART serial port, and then perform some image processing.

Specifications:
  • Optical size 1/6 inch
  • Resolution 640×480 VGA
  • Onboard regulator, only single 3.3V supply needed
  • Standard 0.1inch (2.54mm) pin pitch header connector
  • Mounted with high quality F1.8 / 6mm lens
  • Output support for Raw RGB, RGB (GRB 4:2:2, RGB565/555/444), YUV (4:2:2) and YCbCr (4:2:2) formats
  • High sensitivity for low-light operation
  • Low operating voltage for embedded portable apps
  • Standard SCCB interface compatible with I2C interface
  • Supports image sizes: VGA, CIF, and any size scaling down from CIF to 40×30
Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

Rotarty Encoder Module

Rotarty Encoder Module
  • Rotarty Encoder Module
  • Rotarty Encoder Module
Get Best Quote
Approx. Price: Rs 130 / Piece
We are the leading suppliers for Rotarty Encoder Module. By rotating the rotary encoder can be counted in the positive direction and the reverse direction during rotation of the output pulse frequency, unlike rotary potentiometer counter, which Species rotation counts are not limited. With the buttons on the rotary encoder can be reset to its initial state, that starts counting from 0. The output of incremental rotor encoders provides information about motion of shaft, which is typically further processed in processor/controllers into information such as speed, distance and position.
 
Specifications:
  • Incremental Encoder
  • Supply Voltage: 3-5V
  • Left/Right rotary output pulse, each circle with 20 pulse
  • Built in 10k resistor
  • Cycles per revolution (CPR): 20
Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

PCA9685 16 Channel Servo Driver

PCA9685 16 Channel Servo Driver
  • PCA9685 16 Channel Servo Driver
  • PCA9685 16 Channel Servo Driver
Get Best Quote
Approx. Price: Rs 350 / Piece
This board/chip uses I2C 7-bit address between 0x60-0x80, selectable with jumpers.Terminal block for power input (or you can use the 0.1" breakouts on the side)Reverse polarity protection on the terminal block input Green power-good LED 3 pin connectors in groups of 4 so you can plug in 16 servos at once (Servo plugs are slightly wider than 0.1" so you can only stack 4 next to each other on 0.1" header" Chain-able" design A spot to place a big capacitor on the V+ line (in case you need it)220 ohm series resistors on all the output lines to protect them, and to make driving LEDs trivial Solder jumpers for the 6 address select pins i2c-controlled PWM driver with a built in clock.

Specifications:
  • Dimensions (no headers or terminal block) 2.5" x 1" x 0.1" (62.5mm x 25.4mm x 3mm)
  • Weight (no headers or terminal block): 5.5grams
  • Weight (with 3x4 headers & terminal block): 9grams
  • This board/chip uses I2C 7-bit address between 0x40-0x7F, selectable with jumpers
Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

Stepper Motor Driver 8825

Stepper Motor Driver 8825
  • Stepper Motor Driver 8825
  • Stepper Motor Driver 8825
Get Best Quote
Approx. Price: Rs 200 / Piece

Product Details:

Minimum operating voltage8.2 V
Header pins solderedN5
Maximum operating voltage45 V
Continuous current per phase1.5 A2
Maximum current per phase2.2 A3
Minimum logic voltage2.5 V4
Maximum logic voltage5.25 V4
Microstep resolutionsFull, 1/2, 1/4, 1/8, 1/16, and 1/32

We are the leading suppliers for Stepper Motor Driver 8825. This product is a carrier board or breakout board for TI’s DRV8825 stepper motor driver. Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step. Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates. Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay). 45 V maximum supply voltage. Built-in regulator (no external logic voltage supply needed). Can interface directly with 3.3 V and 5 V systems. Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout. Short-to-ground and shorted-load protection. 4-layer, 2 oz copper PCB for improved heat dissipation. Exposed solderable ground pad below the driver IC on the bottom of the PCB.
Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

Stepper Motor Driver A3967

Stepper Motor Driver A3967
  • Stepper Motor Driver A3967
  • Stepper Motor Driver A3967
Get Best Quote
Approx. Price: Rs 200 / Piece
We are the leading traders for Stepper Motor Driver A3967. The A3967 Stepper Motor Driver for Arduino is a simple to use stepper motor driver, compatible with most microcontrollers that can output a digital 0 to 5V pulse (0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). The module requires a 7V to 30V power supply for a motor. The module has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V.

Specifications:
  • Power supply: 7V to 30V. The higher the voltage, the higher the torque at high speeds.
  • Adjustable current control from 150mA/phase to 750mA/phase.
  • Logic voltage: 5V or 3.3V.
  • A3967 microstepping driver.
  • MS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth).
  • Compatible with 4, 6, and 8 wire stepper motors of any voltage.
  • Dimensions: 48 x 20 (LxW) mm.
Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

Stepper Motor A4988

Stepper Motor A4988
  • Stepper Motor A4988
  • Stepper Motor A4988
Get Best Quote
Approx. Price: Rs 200 / Piece

Product Details:

Minimum operating voltage8 V
Header pins solderedN4
Maximum operating voltage35 V
Continuous current per phase1A2
Maximum current per phase2A3
Minimum logic voltage3 V
Maximum logic voltage5.5 V
Microstep resolutionsFull, 1/2, 1/4, 1/8, and 1/16

We are the leading suppliers for Stepper Motor A4988. This breakout board for Allegro’s A4988 microstepping bipolar stepper motor driver features adjustable current limiting, over-current and over-temperature protection, and five different microstep resolutions (down to 1/16-step). It operates from 8 V to 35 V and can deliver up to approximately 1 A per phase without a heat sink or forced air flow (it is rated for 2 A per coil with sufficient additional cooling). This board ships with 0.1″ male header pins included but not soldered in
Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

150W DC TO DC Boost Converter

150W DC TO DC Boost Converter
  • 150W DC TO DC Boost Converter
  • 150W DC TO DC Boost Converter
Get Best Quote
Approx. Price: Rs 275 / Piece
We are the leading suppliers for 150W DC TO DC Boost Converter. 150W DC-DC Boost Converter module allows you to step up an input voltage as low as 10V and set the output to 12V-35V. The output voltage will be higher than the input voltage. The boost converter design is based on popular Texas Instrument’s UC3844 current mode PWM controller chip

Specifications:
  • Input Voltage: 10v – 32v DC
  • Output Voltage: 12v – 35v DC
  • Output Current: 6A MAX
  • Input Current: 10A (MAX)
  • Output Ripple: 2% MAX
  • Working Temperature: Industrial – 40C to +85C
  • Full-Load temperature: 45 degrees.
  • No-load current: 25mA typical.
  • Voltage regulation: ± 0.5%.
  • Load regulation: ± 0.5%.
  • Dynamic response speed: 200uS 5%.
  • Size: 2.60 in (L), 1.85 in (W) , 1.1 in (H)
Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

5 Axis Stepper Motor Driver

5 Axis Stepper Motor Driver
  • 5 Axis Stepper Motor Driver
  • 5 Axis Stepper Motor Driver
Get Best Quote
Approx. Price: Rs 450 / Piece
We are the leading suppliers for 5 Axis Stepper Motor Driver.

Features:
  • Full Mach3 support and other computer software support for parallel port control.
  • USB power supply and peripherals are supported for phase separation to protect computer security.
  • The peripheral has a large voltage input, 12-24V and anti-reverse function.
  • All the light of the input signal is isolated to the lotus, the limit to protect the computer security, which can be reached by the blade emergency stop.
  • The whole path controls the spindle switch to the relay output port. Outlet door P17 mouth.
  • All way the optocoupler can be controlled with the incoming analog interface converter to control the shaft speed via the isolated 0-10V analog voltage output. Output port P1 port.
  • The optocoupler is accessible by driver 7, all open 17 ports, 5-axis stepper motor can be controlled.
  • The P1 optocouplers can be controlled with input shaft governor as PWM outputs.
  • The 5V drive can be accessed at the common cathode or common anode input level.
  • Up to 5 stepper motor drives can be controlled
Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

MP3 Module FN M16P

MP3 Module FN M16P
  • MP3 Module FN M16P
Get Best Quote
Approx. Price: Rs 250 / Piece
We are the leading suppliers for MP3 Module Fn M16P. FN-M16P is a small and low price MP3 module with an simplified output directly to the speaker. The module can be used as a stand alone module with attached battery, speaker and push buttons or used in combination with an Arduino UNO or any other with RX/TX capabilities.

Features:
  • Supports MP3 and WAV decoding.
  • Supports FAT16 and FAT32 file system.
  • 24-bit DAC output and supports dynamic range 90dB and SNR 85dB.
  • Supports AD key control mode and UART RS232 serial control mode.
  • Supports maximum 32GB micro SD card and 32GB USB flash drive.
  • Supports maximum 3000 audio files under the root directory of the storage device.
  • Supports maximum 99 folders, and each folder can stores 255 audio files.
  • Supports inter-cut advertisements.
  • Supports random playback.
  • Built-in a 3 watts amplifier that can direct drive a 3 watts speaker.
  • 30 levels adjustable volume, and 6 levels adjustable EQ.
Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

XL 6009 DC to DC Step Up Converter

XL 6009 DC to DC Step Up Converter
  • XL 6009 DC to DC Step Up Converter
  • XL 6009 DC to DC Step Up Converter
Get Best Quote
Approx. Price: Rs 175 / Piece

Product Details:

TypeNon-Isolated Boost ( BOOST )
Voltage Regulation+-0.5%
Working Temperature-40 deg C ~ +85 deg C
Dimensions43mm * 21mm * 14mm (length * width* height)
RectificationNon-synchronous rectification
Input Range3V ~ 32V
Output Range5V ~ 35V
Input Current4A (maximum), load 18mA ( 5Vinput, 8V output, no-load is less than 18mA . The higher the voltage
Conversion EfficiencyBetter than 94% (the greater the current, the lower the efficiency)
Switching Frequency400KHz
Output Ripple50mV (the higher the voltage, the greater the current, the greater ripple)
Load Regulation+-0.5%

We are the leading Suppliers for XL 6009 DC to DC Step Up Converter. This DC-DC Module is based on IC XL6009E1 which is a high-performance step-up switching current (BOOST) module. The module uses the second generation of high-frequency switching technology XL6009E1 core chip that offers superior performance over the first generation technology LM2577. XL6009 replaces LM2577 module as LM2577 is about to be phased out.
Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

High Current Motor Driver

High Current Motor Driver
  • High Current Motor Driver
Get Best Quote
Approx. Price: Rs 200 / Piece
The high-power motor driver is a compact MOSFET motor driver. Ideal for use with heavy duty motors like wiper, power window motors and more. All you need to add is a micro-controller or other control circuit to turn the H-Bridge on and off.

Specifications:
  • 5.5VDC-30VDC operating voltage
  • 7A continuous output current per channel
  • 10A peak output current per channel
Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

L293D Motor Driver Board

L293D Motor Driver Board
  • L293D Motor Driver Board
Get Best Quote
Approx. Price: Rs 200 / Piece
We are the leading suppliers for L293D Motor Driver Board. This module is a medium power motor driver perfect for driving DC motors and Stepper motors. It uses the popular Motor Driver Board H-bridge motor driver IC. It can drive 4 DC motors in one direction, or drive 2 DC motors in both the directions with speed control. The driver greatly simplifies and increases the ease with which you may control motors, relays, etc from microcontrollers. It can drive motors up to 12 V with a total DC current of up to 600mA.

Specifications:
  • Operating Voltage: 7 V to 12V DC.
  • 4 channel output(can drive 2 DC motors bidirectionally).
  • 600mA output current capability per channel.
  • PTR connectors for easy connections.
  • User accessible enable pins facility.
Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

L298 Motor Driver Board

L298 Motor Driver Board
  • L298 Motor Driver Board
  • L298 Motor Driver Board
Get Best Quote
Approx. Price: Rs 200 / Piece
We are the leading Suppliers for L98 Motor Driver Board It is a high voltage, high current dual full-bridge driver designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC and stepper motors. Two enable inputs are provided to enable or disable the device independently of the input signals. An additional supply input is provided so that the logic works at the lower level.

Specifications:
  • Operating supply voltage up to 46V
  • Total Dc current up to 4amp (each channel can carry up to 2amp)
  • Low saturation voltage
  • Over temperature protection
  • Logical ”0” input voltage up to 1.5 v (high noise immunity)
  • PTR connector for easy connection.
Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

2000W Thyristor Module

2000W Thyristor Module
  • 2000W Thyristor Module
  • 2000W Thyristor Module
  • 2000W Thyristor Module
Get Best Quote
Approx. Price: Rs 200 / Piece

Product Details:

MaterialPlastic, Metal
Input Voltage220 V
Maximum Power2000 W
Adjustable Voltage90-220V AC
Size5.3 x 4.7 x 2.8 cm

We are the leading suppliers for 2000W Thyristor Module. Connect this device with lamp or home appliance in a series connection, that is, Using the module's two wires connected to lamp or home appliances' disconnect FireWire or zero line. You can play a brightness adjustment, speed, pressure, temperature control effect, very convenient to use.

Features:
  • Suitable for electric furnace, water heater, lamps, small motor, electric iron. etc
  • Life span and easy installation
Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

Dual Channel Stepper Motor Driver L9110

Dual Channel Stepper Motor Driver L9110
  • Dual Channel Stepper Motor Driver L9110
  • Dual Channel Stepper Motor Driver L9110
Get Best Quote
Approx. Price: Rs 150 / Piece
We are the leading suppliers for Stepper Motor Driver L9110. The L9110S 2-Channel motor driver module is a compact board that can be used to drive small robots. This module has two independent motor driver chips which can each drive up 800mA of continuous current. The boards can be operated from 2.5V to 12V enabling this module to be used with both 3.3V and 5V microcontrollers. A set of female header pins is used to connect this module to a microcontroller. The motors are attached via two sets of screw terminals. A PWM Pulse Width Modulation signal is used to control the speed of a motor and a digital output is used to change its direction.

Specifications:
  • On-board 2 L9110 motor control chip
  • Module can be driven by two dc motors at the same time or one phase 4 line 2 type stepping motor
  • Input voltage: 2.5-12V DC
  • Each channel has a continuous output current 800 ma
Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested

Stepper Motor Driver

Stepper Motor Driver
  • Stepper Motor Driver
Get Best Quote
Approx. Price: Rs 150 / Piece
We are the leading suppliers for Stepper Motor Driver. If your stepper motor has a high current rating then it’s better to use this board for driving your stepper motor. The resistors are used for limiting the current and the diodes are used to avoid back EMF.

Specifications:
  • Easy interfacing to Microcontroller.
  • Motor Supply up-to 50VDC.
  • PTR connector for interfacing of Motor to Board.
  • Protection diode.
Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 days
Yes! I am interested
X

Explore more products

Looking for “Motor Driver Boards & Modules”?


Reach Us
Heena Jain (Marketing Executive)
Shop No. 29/30, 2nd Floor, Yamuna Building Tara Temple Lane, Lamington Road
Grant Road East, Mumbai- 400007, Maharashtra, India



Call Us

Share Us

F GT L


Send E-mailSend SMS