Motors And Wheels

The Johnson Geared motor is famous for its compact size and massive torque. A torque as much as x3 as compared to center shaft or side shaft geared motor, with an affordable price tag. The motor comes with a metal gearbox and off center shaft , also shaft has a metal bushing for wear resistance. Apart from robotic application they are also used in industrial applications, vending system, hygiene and cleaning industry, and household electric appliance. Specifications - Shaft Diameter - 6mm RPM - 30/60/100/150/200/300/500/1000

Request
Callback

This Aluminium 4WD Chassis is a simple yet versatile robot chassis designed specifically for students. Featuring a heavy duty aluminium chassis designed with large internal volume, numerous holes and mounting points, providing plenty of space to carry a PCB board and any additional components that you choose.
Features:

• Length: 190mm
• Width: 105mm
• Height: 40mm

 

Request
Callback

High qulaity BO motor wheel.
Features:

• WheelDiameter – 70mm
• Wheel Width– 20mm

 

Request
Callback

12V DC geared motors for robotics applications. Very easy to use and available in standard size. Nut and threads on shaft to easily connect and internal threaded shaft for easily connecting it to wheel. 

Request
Callback

12V DC geared motors for robotics applications. It gives a massive torque of 30Kgcm. The motor comes with metal gearbox and off-centre shaft.

Request
Callback

The Futaba S3003 Plastic Geared Servo Motor is a decent servo for every hobbyist and electronics student. The powerful motor is PWM controlled for easy interfacing.

Features:

• Control System: +Pulse Width Control 1520usec Neutral
• Required Pulse: 3-5 Volt Peak to Peak Square Wave
• Operating Voltage: 4.8-6.0 Volts
• Operating Temperature Range: -20 to +60 Degree C
• Operating Speed (4.8V): 0.23sec/60 degrees at no load
• Operating Speed (6.0V): 0.19sec/60 degrees at no load
• Stall Torque (4.8V): 44 oz/in. (3.2kg.cm)
• Stall Torque (6.0V): 56.8 oz/in. (4.1kg.cm)

Request
Callback

Ball caster wheel is an omni directional wheel. This wheel can be used as free support wheel for the robot.
Features:

• Base plate diameter - 27.5mm
• Caster wheel diameter - 13.5mm
• Wheel height - 18mm
• Mounting hole - Three, 120° apart, 3mm or 1/8 inch diameter.

 

Request
Callback

Pulley wheels are specially designed for conveyer belts. They have a groove running through the middle so that they restrict the belt from slipping. A 2 cm width belt is recommended with this pulley.
Features:

• Width of pulley– 2 cm
• Diameter of pulley – 7 cm
• Diameter of shaft hole – 6 mm

 

Request
Callback

Pulley wheels are specially designed for conveyer belts. They have a groove running through the middle so that they restrict the belt from slipping. A 2 cm width belt is recommended with this pulley.
Features:

• Width of pulley– 4 cm
• Diameter of pulley – 7 cm
• Diameter of shaft hole – 6 mm

 

Request
Callback

High quality Plastic Tracked Wheel for motors with 6mm diameter.
Features:

 

• 68mm diameter
• 4cm width
• Hole diameter 6.1 mm
• Screw for fastening on motor shaft
• Made from virgin plastic

Request
Callback

Coreless Motors, used widely in miniaturized applications where size is of a premium but performance is not.Owing to their light weight and lack of an iron/steel core, they can provide huge power to weight ratios and thus enhanced accelerations often reaching a mechanical time constant under one milli second.

Request
Callback

High quality Plastic Tracked Wheel for motors with 6 mm diameter.

Features:

• Diameter - 10 CM
• Width of wheel - 4 CM
• Shaft bore - 6 MM
• Screw Provided to tight wheel with motor shaft.
• Nice grip with surface.

Request
Callback

This fully-assembled pan-tilt kit is the perfect way to give your project full range motion with two micro servos. The pan-tilt can rotate roughly 180° from side-to-side and can tilt up downwards around 150°.  

Request
Callback

A 14g micro Servo motor with a Metal shaft.
Features:

• Modulation:Analog
• Torque:4.8V: 30.60oz-in(2.20kg-cm)                            6.0v: 34.70oz-in(2.50kg-cm) 
• Speed:4.8V: 0.11 sec/60°
                   6.0V: 0.10 sec/60°
• Weight:14g

Request
Callback

MG945 Towerpro Digital Metal Servo 12KG High torque. Ii is for 1/8 buggy monster and many RC model.
It is low cost of digital servo with export quality and great servo for just about any application.
Features:

• Weight: 55g
• Dimension: 40.7×19.7×42.9mm
• Stall torque: 10kg/cm (4.8v); 12kg/cm (6v)
• Operating speed: 0.23sec/60degree (4.8v); 0.2sec/60degree (6.0v)
• Operating voltage: 4.8 ~ 6.6v
• Temperature range: 0- 55deg
• Gear Type: Metal gear

Request
Callback

Since our commencement, our firm is engaged to introduce a premium quality array of Servo Motor Mg995. This motor enables users to connect the different module directly to the system. Also, users can interface the motor module to microcontroller for which controllers require a better IC on board circuit. In addition, motor offered by us has gained highly appreciation among our clients. Besides, clients can avail the motor from us at cost effective rates.

Features:

• Compliant with most standard receiver connector: Futaba, Hitec, Sanwa, and GWS.
• Great for truck, Boat, Racing Car, Helicopter and Aero plane
• Power Supply: Through External Adapter

Specifications:

• Connector Wire Length: 300mm
• Dimension: 40mm x 19mm x 43mm
• Weight: 55g
• Operating Speed: 0.17sec / 60 degrees (4.8V no load)
• Operating Speed: 0.13sec / 60 degrees (6.0V no load)
• Stall Torque: 13 kg-cm (180.5 oz-in) at 4.8V
• Stall Torque: 15 kg-cm (208.3 oz-in) at 6V
• Operation Voltage: 4.8 - 7.2Volts
• Connector Wire: Heavy Duty, 11.81" (300mm)

Request
Callback

Additional Information:

• Item Code: Mg995

These have bags of torque, a digital amplifier and are almost bulletproof. So these will be great for buggies and cars.

Features:

• All Metal Gears.
•    Double Ball Bearings.
• Compliant with most standard receiver connector: Futaba, Hitec, Sanwa, GWS etc....
• Great for truck, Boat, Racing Car, Helicopter and Aeroplane.
• Power Supply: Through External Adapter.
• Stable and Shock Proof.
• Core-less Motor.

Specifications:

• Connector Wire Length: 300mm.
• Dimension: 40mm x 19mm x 43mm.
• Weight: 55g.
• Operating Speed: 0.17sec / 60 degrees (4.8V no load).
• Operating Speed: 0.13sec / 60 degrees (6.0V no load).
• Stall Torque: 13 kg-cm (180.5 oz-in) at 4.8V.
• Stall Torque: 15 kg-cm (208.3 oz-in) at 6V.
•  Operation Voltage: 4.8 - 7.2Volts
• Connector Wire: Heavy Duty, 11.81" (300mm).

 

 

 

Request
Callback

A very high quality and high torque (40kgs) servo motor.
Features:

• Size :59.5X29X55.2
• Weight:164g
• Speed :0.20sec/60degree at(6.0V)       0.18sec/60degree at(7.2V)
• Torque:38kg.cm.at(6.0V)     40kg.cm.at(6V)
• Voltage:4.8V-6V

Request
Callback

1 meter long track belt for making tracked robot width 4 cm.

Request
Callback

Owing to the expertise of our team of experienced professionals, we are able to introduce an exclusive range of SG90 9G Micro Servo Motor. The offered motor improves upon the power output and data protocol of the Pro Series2. This motor allows users to measure various level based on the fresh firmware. In addition, this motor permits a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port. Apart from this, clients can get the motor from us at industry leading prices.
Features:

• Operating Speed (4.8V no load): 0.12sec/60 degrees
• Stall Torque: 1.2kg / 42.3oz (4.8V); 1.6 kg / 56.4oz (6.0V)
• Temperature Range: -30 to +60 Degree C
• Dimensions: 22 x 11.5 x 27mm
• Operating Speed (4.8V no load): 0.12sec/60 degrees
• Stall Torque: 1.2kg / 42.3oz(4.8V); 1.6 kg / 56.4oz (6.0V)
• Temperature Range: -30 to +60 Degree C
• Dead Band Width: 7usec
• Operating Voltage:3.0-7.2 Volts
• SG90 Micro Servo
• All Nylon Gear
• Connector Wire Length 150mm
• Weight: 0.015 kg

Request
Callback

The Mini Stepper Driver is small size and easy to use. It used ULN2003A to amplify the control signal from the Arduino. The Drive voltage can up to 15v.
Features:

• The most easy module to learn how to control the Stepper and finish the simple project.
• The logic control voltage:3~5.5V
• Motor Supply Voltage: 5~ 15V
• It can sink 500mA from a 50V supply,but you'd better limit the driver voltage under 15v.
• Operating temperature: -25 degree Celsius ~ +90 degree Celsius

Request
Callback

Dual shaft DC geared motor which gives good torque and rpm at lower voltages. This motor can run at approximately 340 rpm when driven by a Dual Li-Ion cell battery.

It is most suitable for light weight robot running on small voltage. Out of its two shafts one shaft can be connected to wheel, other can be connected to the position encoder.
Features:

• Working voltage : 3V to 9V
• 30gm weight
• Ability to operate with minimum or no lubrication, due to inherent lubricity.
• 1.9 Kgf.cm torque
• No-load current = 60 mA, Stall current = 700 mA

Request
Callback