Arduino Board and Shields

Approx. Rs 700 / PieceGet Latest Price

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 2-3 days

Approx. Rs 200 / PieceGet Latest Price

We are the leading suppliers of Arduino NANO. The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328P (Arduino Nano 3.x). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 2-3 days

Approx. Rs 500 / PieceGet Latest Price

We are the leading traders of Arduino Leonardo. The Arduino Leonardo is a microcontroller board based on the ATmega32u4 (datasheet). It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 2-3 days

Approx. Rs 170 / PieceGet Latest Price

We are the leading traders of ARDUINO PROMINI. This board was developed for applications and installations where space is premium and projects are made as permanent set ups. Small, available in 3.3 V and 5 V versions, powered by ATmega328

Features:

• It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. A six pin header can be connected to an FTDI cable or Sparkfun breakout board to provide USB power and communication to the board.
• The pin layout is compatible with the Arduino Mini. 
• There are two version of the Pro Mini. One runs at 3.3V and 8 MHz, the other at 5V and 16 MHz. 

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 2-3 days

Approx. Rs 250 / PieceGet Latest Price

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 2-3 days

Approx. Rs 80 / PieceGet Latest Price

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 2-3 days

Approx. Rs 800 / PieceGet Latest Price

• USB 2.0 Full Speed compatible
• 3.3/5V operation level compatible
• All GPIOx pins break-out
• USB Host 5V/500mA supply for USB protocol

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 2-3 days

Approx. Rs 450 / PieceGet Latest Price

Features:

• SD card interface works with FAT16 or FAT32 formatted cards. Built in 3.3v level shifter circuitry lets you read or write super fast and prevents damage to your SD card
• Real time clock (RTC) keeps the time going even when the Arduino is unplugged. The coin cell battery backup lasts for years
• Included libraries and example code for both SD and RTC mean you can get going quickly
• Prototyping area for soldering connectors, circuitry or sensors.
• Two onfigurable indicator LEDs
• Onboard 3.3v regulator is both a reliable reference voltage and also reliably runs SD cards that require a lot of power to run
• Uses the "R3 layout" I2C and ICSP/SPI ports so it is compatible with a wide variety of Arduinos and Arduino-compatibles

Package included:

• 1 x Data logger module
• 1 x Lithium cell

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 2-3 days

Approx. Rs 150 / PieceGet Latest Price

We are the leading suppliers of Arduino Motor control Shield. The Arduino Motor Shield is based on the L298 (datasheet), which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors. It lets you drive two DC motors with your Arduino board, controlling the speed and direction of each one independently.

Features:

• The shield contains two L293D motor drivers and one 74HC595 shift register.
• The shift register expands 3 pins of the Arduino to 8 pins to control the direction for the motor drivers. The output enable of the L293D is directly connected to PWM outputs of the Arduino.
• To increase the maximum current, the L293D allows extra chips with "piggyback". Piggyback is soldering one or two or three extra L293D drivers on top of the L293D drivers on the board to increase the maximum current. The L293D allows parallel operation.
• The Motor Shield is able to drive 2 servo motors, and has 8 half-bridge outputs for 2 stepper motors or 4 full H-bridge motor outputs or 8 half-bridge drivers, or a combination.
• The servo motors use the +5V of the Arduino board. The voltage regulator on the Arduino board could get hot. To avoid this, the newer Motor Shields have connection points for a separate +5V for the servo motors.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 2-3 days

Approx. Rs 170 / PieceGet Latest Price

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 2-3 days

Approx. Rs 400 / PieceGet Latest Price

The servo shield allows you to connect upto 20 servos to your SPDuino or other arduino-compatible boards .The selectable supply for the servos enables you to choose the supply either from the on-board regulator or any other suitable power source through the separate servo power terminals. Suitable for making arm robots, Hexapods and other servo based robots.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 2-3 days

Approx. Rs 135 / PieceGet Latest Price

• 6 x Buckled 3 pin analogue connectors providing connections to Analogue pins A0 to A5, GND and 5V
• 1x Buckled 4 pin serial I2C / UART interface (selectable via on board jumpers) providing convenient connection to serial or I2C sensors or displays.
• 12x Servo headers proving access to digital pins 0 to 13 with VCC and GND power connections.
• 6x Aux headers providing access to analogue pins A0 to A5
• Serial I2C / UART jumper selection
• Reset button
• Standard Arduino headers for adding additional shields

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 2-3 days

Approx. Rs 300 / PieceGet Latest Price

• Expandable to control other accessories.
• 3 Mosfets for heater / fan outputs and 3 thermistor circuits.
• Fused at 5A for additional safety and component protection
• Heated bed control with additional 11A fuse
• Fits 5 Pololu stepper driver boards
• Pololu boards are on pin header sockets so they can be replaced easily or removed for use in future designs.
• I2C and SPI pins left available for future expansion.
• All the Mosfets are hooked into PWM pins for versatility.
• Servo style connectors are used to connect to the end stops, motors, and LEDs. These connectors are rated for 3A, very compact, and globally available.
• SD Card add on available
• LEDs indicate when heater outputs on

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 2-3 days

Approx. Rs 150 / PieceGet Latest Price

• GRBL 0.8c compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals u
• 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
• 2 x End stops for each axis (6 in total)
• Spindle, Coolant enable and direction
• Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825 and others)
• Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping)
• Compact design.
• Stepper Motors can be connected with 4 pin molex connectors.
• Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 2-3 days

Approx. Rs 475 / PieceGet Latest Price

The Arduino Ethernet Shield 2 connects your Arduino to the internet in mere minutes. Just plug this module onto your Arduino Board, connect it to your network with an RJ45 cable (not included) and follow a few simple steps to start controlling your world through the internet. As always with Arduino, every element of the platform – hardware, software and documentation – is freely available and open-source. 

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 2-3 days

Approx. Rs 400 / PieceGet Latest Price

We are the leading traders of  Funduino Joystick shield.

Specification:

• 3V to 5V Gamepad Joystick Shield Module Game Rocker Button Controller Expansion Board For Arduino Simulated Keyboard Mouse 1pcs
• NRF24L01 RF interface for Nokia 5110 LCD interface bluetooth interface I2C interface for one PS2 toystick working voltage: 3.3V or 5V eg. STM32

Additional Information:

• Minimum Order Quantity: 1 Piece
• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 2-3 days

Approx. Rs 200 / PieceGet Latest Price

• Implements Processing/Wiring language
• The open-source IDE can be downloaded for free (currently for Mac OS X,  Windows, and Linux)
• Sensor Shield allows you to connect to various modules like sensors, servos,  relays, buttons, potentiometers
• Mega Sensor Shield V2.0 pinout all of the Arduino digital and analog interface
• Support IIC interface
• Support 32 road Servo Motor Drive Shield interface
• Support bluetooth module communication interface
• Support SD card module communication interface
• Support APC220 wireless rf modules communication interface
• Support RB URF ultrasonic sensors interface
• Support LCD serial and parallel interface
• Support Kinds of interface and can be fully compatibled with Arduino Mega

Additional Information:

• Minimum Order Quantity: 1 Piece
• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 2-3 days

Approx. Rs 1,200 / NumberGet Latest Price

This is Arduino Due, AT91SAM3X8E ARM Cortex-M3 Board, 84MHz, 512KB Board. The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU. It is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), a 84 MHz clock, an USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button.

The board contains everything needed to support the microcontroller; simply connect it to a computer with a micro-USB cable or power it with an AC-to-DC adapter or battery to get started. The Due is compatible with all Arduino shields that work at 3.3V and are compliant with the 1.0 Arduino pinout.

1. Microcontroller AT91SAM3X8E
2. Operating Voltage 3.3V
3. Input Voltage (recommended) 7-12V
4. Input Voltage (limits) 6-16V
5. Digital I/O Pins 54 (of which 12 provide PWM output)
6. Analog Input Pins 12
7. Analog Outputs Pins 2 (DAC)
8. Total DC Output Current on all I/O lines 130 mA
9. DC Current for 3.3V Pin 800 mA
10. DC Current for 5V Pin 800 mA
11. Flash Memory 512 KB all available for the user applications
12. SRAM 96 KB (two banks 64KB and 32KB)
13. Clock Speed 84 MHz
14. Dimensions 104 x 53 x 15 (LxWxH) mm.
15. Weight 35 gm.

Additional Information:

• Minimum Order Quantity: 1 Number
• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 2-3 days

Approx. Rs 850 / NumberGet Latest Price

Additional Information:

• Minimum Order Quantity: 1 Number
• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 2-3 days

Approx. Rs 350 / PieceGet Latest Price

The Pro Micro Leonardo is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity on-board and do away with bulky external USB interface. It has Arduino Leonardo bootloader in it. So you can just use it like a normal Arduino Leonardo board.

This tiny little board does all of the neat-o Arduino tricks that you’re familiar with: 4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. Running at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere. There is a voltage regulator on board so it can accept voltage up to 12VDC. If you’re supplying unregulated power to the board, be sure to connect to the “RAW” pin on not VCC.

Features:

• ATmega32U4 running at 5V/16MHz with Arduino Leonardo bootloader
• On-Board micro-USB connector for programming
• 4 x 10-bit ADC pins
• 12 x Digital I/Os (5 are PWM capable)
• Rx and Tx Hardware Serial Connections
• Dimensions: 1.3x0.7"

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 2-3 days

Approx. Rs 320 / PieceGet Latest Price

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 2-3 days

Approx. Rs 1,300 / NumberGet Latest Price

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 2-3 days

Approx. Rs 250 / PieceGet Latest Price

Arduino Uno R3 is the clone one of the latest version of Arduino Uno with an on-board CH340 usb - serial converter chip. Even there are some little differences respect to original one, it is almost the same in terms of usage and software. This provides you a cheaper opportunitiy to get started with Arduino boards.

The microcontroller model of this board is the same as the original one (Atmega328). The only difference between microcontrollers is ther package. Original one has a DIP package but the clone one has SMD package microcontroller

Technical Features:

- Atmega328 Microcontroller

- 7-12 V Input Voltage

- 14 Digital I/O pins

- 6 PWM Out

- 6 ADC In
 

- 16 Mhz Clock Signal 

- 32 kB Flash Memory

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 2-3 days

Approx. Rs 350 / PieceGet Latest Price

An Arduino UNO Compatible wifi board based on ESP8266EX.

• 11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire supported(except for D0)

• 1 analog input(3.2V max input)

• Micro USB connection

• Power jack, 9-24V power input.

• Compatible with Arduino

• Compatible with nodemcu

• Support OTA wireless uploading

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 2-3 days

Approx. Rs 270 / PieceGet Latest Price

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 2-3 days

Product Price :Get Latest Price

Additional Information:

• Minimum Order Quantity: 1 Number
• Delivery Time: 2-3 days

Approx. Rs 250 / NumberGet Latest Price

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 2-3 days

Product Price :Get Latest Price

1. 16 characters wide, 2 rows
2. White text on the blue background
3. Single LED backlight included can be dimmed easily with a resistor or PWM.
4. Can be fully controlled with only 6 digital lines! (Any analog/digital pins can be used)

Additional Information:

• Minimum Order Quantity: 10 Number
• Delivery Time: 2-3 days

Approx. Rs 120 / PieceGet Latest Price

• This Nano Mult-Function expansion board is designed specially for Arduino Nano, solve the problem of wiring confusing when a variety of sensors connected.
• Lead out all digital IO port and analog IO port, each one with standard positive and negative power interface.
• Lead out the I2C interface of mainboard for convenient connection.
• Increasing the DC power supply interface. Nano USB interface supply current is actually only 50MA, to bring high-current devices, such as the steering, is obviously insufficient. So in the DC power connector provide external power supply to ensure the stability of equipment operation.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 2-3 days

Approx. Rs 110 / PieceGet Latest Price

The Prototype Shield makes it easy for you to design custom circuits. You can easily solder TH or SMD ICs on the prototyping area to test them with your Arduino board. The SMD area is designed for a maximum of 24 pins SOIC integrated circuit and the TH area contains a lot of space for the needed components around your project. You can even stick a mini breadboard (not included) on the protoarea for solderless operation. The proto area includes also two power lines (IOREF and GND), two LEDs pads and SPI signals breakout pads for boards with SPI only on the ICSP header like Zero.

Features:

• 1.0 Arduino Pinout
• 1 ICSP Connector footprint
• 2 LEDs and resistor footprint
• IOREF and GND power lines
• SPI signals pads
• 24 pin SMD footprint (50 mils pitch)
• Fits regular Arduino headers
• Dimensions (assembled): 69mm x 53mm x 13mm (2.7in x 2.1in x 0.5in)

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 2-3 days

Approx. Rs 400 / PieceGet Latest Price

• 2.4 inch LCD TFT display has Bright, 4 white-LED backlight .
• Colorful, 18-bit 262,000 different shades
• 4-wire resistive touchscreen
• 240 x 320 resolution
• Spfd5408 controller with built in video RAM buffer
• 8 bit digital interface, plus 4 control lines
• Uses digital pins 5-13 and analog 0-3. Digital pins 2, 3 and analog 4 and 5 are available for user defined purpose.. Pin 12 is available if micro SD is not used.
• 5V compatible, can be used with 3.3V or 5V logic

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 2-3 days

Approx. Rs 750 / PieceGet Latest Price

This TFT display is big (3.5" diagonal) bright (6 white-LED backlight) and colourful! 480x320 pixels with individual RGB pixel control, this has way more resolution than a black and white 128x64 display, and double our 2.8" TFT. As a bonus, this display has a resistive touch screen attached to it already, so you can detect finger presses anywhere on the screen.

Features:

• 3.5" diagonal LCD TFT display
• 320x480 resolution, 18-bit (262,000) color capable - our code uses only 16-bits since its faster.
• 8 bit digital interface, plus 4 or 5 control lines (12 pins minimum) or SPI mode with 4 or 5 SPI data/control lines (4 pins minimum) - not including the touch screen.
• 5V compatible! Use with 3.3V or 5V logic such as an Arduino
• Onboard 3.3V @ 150mA LDO regulator
• 6 white LED backlight w
• ith DC/DC constant-current boost. You can PWM dim the backlight
• 1x20 headers for easy breadboarding
• 4-wire resistive touchscreen

Additional Information:

• Minimum Order Quantity: 1 Piece
• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 2-3 days

Approx. Rs 1,350 / KitGet Latest Price

This is a multifunctional kit based on Arduino development board. It includes many of the most popular accessories for DIY projects: like Breadboard, Jumper wires, Color LEDs, Resistors, Buzzer, etc. When you get the kit, you can follow the tutorial to do experiments without buying any other additional components. The kit can help you learn Arduino programming and learn how to make interesting projects. 

Packaging List

1pcs UNO R3
1pcs USB cable
1pcs 65 jumper wires
1pcs 830 Point BREADBOARD
15pcs led (Red, Green, Yellow)
30pcs resistance(220R, 10K, 1K)
1pcs 10 pin dupont line(male to female)
1pcs potentiometer
1pcs active buzzer
1pcs passive buzzer
1pcs 74HC595N
1pcs Infrared receiving head
1pcs LM35DZ
1pcs Flame sensor
2pcs Roll Ball Switch
3pcs 5mm LDR
5pcs Button Switch with Cap
1pcs IR remote control
1pcs one digital tube
1pcs four digital tube
1pcs 8*8 dot matrix tube
1pcs UNL2003 driver board
1pcs 5V stepper motor
1pcs SG90
1pcs LCD1602 IIC I2C
1pcs PS2 game joystick module
1pcs DHT11 Temperature and Humidity sensor module
1pcs Water level measurement module
1pcs RFID module
1pcs RFID key ring
1pcs RFID card
1pcs sound sensor module
1pcs one road relay module
1pcs RTC module
1pcs 16 buttons matrix keyboard module
1pcs RGB three color module
1pcs 9V Battery Connector

Approx. Rs 600 / PieceGet Latest Price

• 40x320 resolution, 18-bit (262,000) color - our library uses 16 bit color mode
• High speed SPI display with digital SPI touchscreen driver
• The display uses digital pins 13-9. Touchscreen controller requires digital pin 8. microSD pin requires digital #4. That means you can use digital pins 2, 3, 5, 6, 7 and analog 0-5. Pin 4 is available if not using the microSD
• Works with any classic Arduino '328. Solder closed three jumpers to use the ICSP header for use with Leonardo or Mega
• Onboard 3.3V @ 300mA LDO regulator, current draw depends on usage but is about 100mA for the display and touchscreen
• 4 white LED backlight. On by default but you can connect the transistor to a digital pin for backlight control
• 4-wire resistive touchscreen attached to STMPE610 controller

Additional Information:

• Minimum Order Quantity: 1 Piece
• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 2-3 days

Product Price :Get Latest Price

This 1.3 Inch 128×64 OLED Display Screen Module offers 128×64 pixel resolution. They are featuring much less thickness than LCD displays with good brightness and also produce better and true colors.

This OLED Display Module is very compact and will add a great ever user interface experience to your Arduino project. The connection of this display with Arduino is made through SPI interface.

The 1.3 Inch 128×64 OLED Display Screen Module produces blue text on black background with very good contrast when supplied with DC 2.8V supply. The OLED Display Modules also offers a very wide viewing angle of about greater than 160°.

Pin Description:

OLED Display Module to Arduino

GND: GND.
VDD: 3.3V (VCC).
MOSI: D11 (don’t change).
SCK: D13 (don’t change).
D/C: D8 (can be any digital pin).
RST: D9 (can be any digital pin).
CS: D10 (can be any digital pin).

1. No need of the backlight
2. The display is self-illuminating
3. Power requirement is low
4. They are offering the large viewing angle
5. Full Compatible with Arduino
6. The ultra-low power consumption of around 0.08w at full screen lit.

Additional Information:

• Minimum Order Quantity: 1 Number
• Delivery Time: 2-3 days

Approx. Rs 1,600 / KitGet Latest Price

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 2-3 days

Product Price :Get Latest Price

Additional Information:

• Minimum Order Quantity: 1 Piece