Approx. Rs 150 / PieceGet Latest Price
Product Details:Voltage | 12 V |
Type of Motor | DC |
Phase | Single Phase |
IP Rating | IP21 |
Color | Black |
Condition | New |
Product Price :Get Latest Price
Product Details:Speed | 18000 RPM |
Motor Diameter | 28.5 mm |
Length | 63 mm |
weight | 180gm |
Application | Industrial |
Voltage | 12 V |
Approx. Rs 400 / PieceGet Latest Price
Product Details:Model No. | S3003 |
Torque | 2.5-3 kg/cm |
Reaction Speed | 0.16-0.2sec / 60 degrees |
Operation Temperature | -30 ~ +60 degree |
Rotation Angle | 180 degrees |
Actuator type | Simulation of steering gear |
Working Current | 10 mA |
Using Voltage | 4.8-6V |
Structural Material | Plastic gear,pull 3kg |
Approx. Rs 350 / PieceGet Latest Price
Product Details:Gear Type | Metal gear |
Weight | 55 g |
Current draw at idle | 10 mA |
Dimension | 40.7x19.7x42.9mm |
Stall Torque | 10kg/cm (4.8v); 12kg/cm (6v) |
Operating Speed | 0.23sec/60degree (4.8v); 0.2sec/60degree (6.0v) |
Operating Voltage | 4.8 ~ 6.6v |
Temperature Range | 0- 55deg |
Dead band width | 1us |
Power Supply | Through External Adapter |
Servo Wire Length | 32 cm |
Approx. Rs 2,800 / PieceGet Latest Price
Product Details:Speed | 0.20sec/60degree at(6.0V), 0.18sec/60degree at(7.2V) |
Voltage | 4.8V-6V |
Torque (%) | 38kg.cm.at(6.0V), 40kg.cm.at(6V) |
Size | 59.5X29X55.2 |
Weight | 164 g |
Product Price :Get Latest Price
Product Details:Gear Type | Plastic |
Operating Voltage | +5V typically |
Torque | 2.5kg/cm |
Operating Speed | 0.1s/60deg |
Rotation | 0deg-180deg |
Weight of motor | 9 gm |
Approx. Rs 350 / PieceGet Latest Price
MG995 Metal Gear Servo Motor is a high-speed standard servo can rotate approximately 180 degrees (60 in each direction) used for airplane, helicopter, RC-cars and many RC model. Provides 10kg/cm at 4.8V, and 12kgcm at 6V.
Additional Information:
Approx. Rs 450 / PieceGet Latest Price
TowerPro MG995 – Continuous Rotation 360° Metal Gear Servo Motor is a high-speed standard servo can rotate 360 degrees. You can use any servo code, hardware or library to control these servos, so it’s great for beginners who want to make stuff move without building a motor controller with feedback & gearbox, especially since it will fit in small places. The MG995 Metal Gear Servo also comes with a selection of arms and hardware to get you set up nice and fast.Approx. Rs 250 / SetGet Latest Price
Mechanical structure is simple, it is easy to install.
Additional Information:
Approx. Rs 550 / SetGet Latest Price
Mechanical structure is simple, it is easy to install
Package included:
2 x car chassis (Acrylic)
4 x BO gear motor )
4 x 20 line speed encoder
4 x Tyre
8 x Fastener
Some screw, nut and copper pillar
Additional Information:
Product Price :Get Latest Price
MG90S is the most popular 9g metal servo .Product Price :Get Latest Price
N20 Micro Gear Motor with Rubber Wheel For Robot Smart Car
Additional Information:
Product Price :Get Latest Price
Dagu - 2DOF Arm with Gripper and Servos (13cm)The robotic claw can bring life to any project. Using just gears and the servo, gripping, grabbing and even clamping objects can be easily implemented into your project. Made from strong 3mm sheet aluminium this 2 degree of freedom robotic arm with a gripper allows mobile robots to pick up and move objects. The arm comes fully assembled, but needs a controller and power sourcEFeatures and Kit Contents:
Kit comes complete as Shown in Picture and Includes:
Metal Parts
2 Servos
Servo Features:
Operating Voltage 4.8V-6V
Additional Information:
Approx. Rs 450 / PieceGet Latest Price
Product Details:Speed | 18000 |
Torque | 30 kg-cm |
Gearbox Diameter | 37 mm |
Motor Diameter | 28.5 mm |
Length | 63 mm without shaft |
Shaft Length | 30 mm |
Weight | 180 gm |
No Load Current | 800 mA |
Load Current | Upto 7.5 A (Max) |
Approx. Rs 240 / PieceGet Latest Price
Product Details:Horizontal Rotation Range | 180 Deg |
Horizontal Rotation Speed | 100 Deg./S |
Tilt Rotation Range | 180 Deg |
Tilt Rotation Speed | 100 Deg./S |
Dimensions | 65 X 52 X 40mm |
Net Weight | 42 g |
Combined Camera Gimbal Gross Weight | 56 g |
Approx. Rs 130 / PieceGet Latest Price
Product Details:Motor Diameter | 8.5 mm |
Motor Length | 20 mm |
Shaft Diameter | 1.0 mm |
Cable Length | 60 mm |
Weight | About 5 g |
Additional Information:
Approx. Rs 200 / PairGet Latest Price
Product Details:Step Angle | 5.625 x 1/64 |
Voltage | 5 V |
Diameter | 28 mm |
Reduction Ratio | 1/64 |
Approx. Rs 60 / PieceGet Latest Price
Product Details:Length | 190 mm |
Width | 105 mm |
Height | 40 mm |
Approx. Rs 40 / PieceGet Latest Price
Product Details:Material | Plastic |
Pulley Diameter | 7 cm |
Width | 4 cm |
Approx. Rs 60 / PieceGet Latest Price
Product Details:Width of Pulley | 4 cm |
Diameter of Pulley | 7 cm |
Diameter of Shaft Hole | 6 mm |
Approx. Rs 150 / PieceGet Latest Price
Specification:
Additional Information:
Approx. Rs 55 / PieceGet Latest Price
Description : Low cost high performance Dc geared motor with wide operating voltage range of 3~12 volts DC and good output torque capability.
Additional Information:
Approx. Rs 55 / PieceGet Latest Price
Dual Shaft – BO series 1 gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors. Small shaft with matching wheels give optimized design for your application or robot. Mounting holes on the body & light weight makes it suitable for in-circuit placement.Specifications of BO1 Dual Shaft 100Rpm Motor
Additional Information:
Approx. Rs 55 / PieceGet Latest Price
Single Shaft Plastic Gear Motor – BO-2 series gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors. Small shaft with matching wheels gives an optimized design for your application or robot. Mounting holes on the body & light weight makes it suitable for in-circuit placement.
Specifications:
Additional Information:
Approx. Rs 1 / NumberGet Latest Price
• Dual shaft DC geared motor which gives good torque and rpm at lower voltages.
Additional Information:
Product Price :Get Latest Price
A DC motor with gear box attached to the shaft, which is mechanically commutated electric motor powered from direct current (DC). Generally used in DIY projects, Battery operated toys, Radio controlled vehicles, Robotic projects etc. Specification & Features
Additional Information:
Product Price :Get Latest Price
Features
Additional Information:
Product Price :Get Latest Price
FeaturesThis High-Torque MG996R Digital Servo features metal gearing resulting in extra high 10kg stalling torque in a tiny package. The MG996R is essentially an upgraded version of the famous MG995 servo, and features upgraded shock-proofing and a redesigned PCB and IC control system that make it much more accurate than its predecessor. The gearing and motor have also been upgraded to improve dead bandwith and centering. The unit comes complete with 30cm wire and 3 pin 'S' type female header connector that fits most receivers, including Futaba, JR, GWS, Cirrus, Blue Bird, Blue Arrow, Corona, Berg, Spektrum and Hitec.
This high-torque standard servo can rotate approximately 180 degrees (90 in each direction). You can use any servo code, hardware or library to control these servos, so it's great for beginners who want to make stuff move without building a motor controller with feedback & gear box, especially since it will fit in small places. The MG996R Metal Gear Servo also comes with a selection of arms and hardware to get you set up nice and fast!
Specifications
Additional Information:
Product Price :Get Latest Price
These are the stepper motors we use in our i3 printer kits. They're lightweight and compact, but still provide plenty of torque - we've found them to be perfect for everyday printer duty.
The motor's shaft has been ground flat, making it easy to get a good grip with a pulley, drive gear - or anything that uses a grub screw, really.
Another handy feature of these motors is their detachable leads - this makes installation a breeze, and it's easy to redo your wiring later if you'd like. We've had the included cables customised to plug straight into a RAMPS board, so installation of these motors is literally plug-and-play!
These motors provide an impressive 28N-cm of torque while running at under 1A! More than enough power to get the job done, and you don't have to run your stepper drivers at their limit - perfect!
We recommend these motors for X/Y/Z axis movement on a cartesian printer - for a delta printer, or for use in an extruder, you'd want to look at something with a bit more grunt like our larger 40mm motors (check the related items!).
Specifications
Additional Information:
Product Price :Get Latest Price
Ideal Motor for CNC machines. Standard Nema23 frame size. 19Kgcm bipolar mode torque.
Features
Additional Information:
Explore More Products
© Micron. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited