Send Email

Call 0804290430174% Response Rate

Home » Our Products » Robo Kits And Accessories

Robo Kits And Accessories

Micron is leading manufacturer of various types of robot kits like Line follower Robot, Bluetooth Controlled Robot, DTMF controlled Robot.Micron also supplier of various robotic accessories.

Easy To Use Fingerprint Module(R305 & R307)

REQUEST CALLBACK

Get Best Quote

Approx. Rs 2,000 / PieceGet Latest Price

The fingerprint sensor is combination of R305 FP+PIC MCU board that can read different fingerprints and store in its own flash memory. The sensor can perform three functions namely Add(Enroll) , Empty Database or Search Database and return the ID of stored fingerprint.
Any of three functions can be called simply by making the pin low of the sensor or pressing onboard three switches. The response is either error or ok which is indicated by onboard LED. The response is also returned as single serial data byte. The return byte is a valid ID or error code. The response byte is a single byte at 9600 bps thus making whole sensor very easy to use. We have provided indicating LEDs and function switch already so it’s ready to use when you receive it. Just give power and start using the sensor using onboard switches. Then you can move on making external application using these functions.

Features:

Easy to use
Status LEDs
Function Switches
Single byte response
Works at 5V
UART 9600bps response

Additional Information:

Minimum Order Quantity: 1 Piece

Yes! I am Interested

Jumper Wire (M-M, M-F, F-F)

REQUEST CALLBACK

Get Best Quote

Approx. Rs 50 / PieceGet Latest Price

A 40 wire Ribbon Cable terminated in female header sockets suitable for breadboard connections. Can be easily broken down into individual cables or multi cables for easy wiring.

Features:

Multiple colours
30cm long
Female Sockets at each end

Yes! I am Interested

Serial Output Load Cell Module

REQUEST CALLBACK

Get Best Quote

Approx. Rs 1,500 / PieceGet Latest Price

This module is a complete solutions for weighing applications. This module consists of analog front end, 24 bit ADC and a microcontroller to give digital out of measured load. This module direct ally out serial data 9600 baud for direct reading in Kilograms.

Features:

Easy to use
Small in size
Working Voltage - 5VDc.
UART Baud (8 bit data, no parity, 1 stop bit) :-9600 bps
Output reading rate - 500 milliseconds.
Run mode and Calibration mode Selected by Jumper

Additional Information:

Minimum Order Quantity: 1 Piece

Yes! I am Interested

75 PCS Plastic Gears Kits Robot Accessory

REQUEST CALLBACK

Ask for Price

Product Price :Get Latest Price

Product Details:

A Loose Teeth	S162A
Motor bushings	2A (2PCS),2.5A (2PCS),3A (2PCS)
Number of Pieces	75
Rack	2PCS
Kinds of Worm	2 kinds of worm W6*62A
Rubber band	yellow color .a rhubarb and colour and a black one white one

Description:
There are many gears of different sizes and many other accessories which may meet your basic needs for model making. They are also good replacement of old or broken parts.

75pcs of gear can match each other, all combined into gears, these gears are suitable for shaft.
Inside the gear pack ：
9 kinds of spindle straight teeth
There are 11 kinds of crown gears
12 kinds of single gear
19 kinds of double gear
There are 7 kinds of pulleys W6*82A
2 kinds of worm W6*62A,
three through shaft sleeve 1 kinds of： 3T-2A-2B
a loose teeth ：S162A
Motor bushings: 2A (2PCS), 2.5A (2PCS), 3A (2PCS)
Rubber band: yellow color .a rhubarb and colour and a black one white one
Rack: 2PCS

Additional Information:

Delivery Time: 2-3 days

Yes! I am Interested

DPDT Switch

REQUEST CALLBACK

Get Best Quote

Approx. Rs 20 / PieceGet Latest Price

DPDT Rocker Switches are great to control the direction of DC Motors. We have carefully selected the best Rocker Switch with a high load rating and perfect size to be used in Robotics. This rocker switch has three positions - the default center position, one on position and another off position. The rocker switch stays in the on or off position as long as it is being pressed down and returns to the default center position when not pressed. This feature can be used to control the direction of a DC Motor. With simple wiring as shown in the additional photos of the image, the switch can be used to drive a DC Motor in clockwise and in anti clockwise directions.

This switch is great to control DC Motors in Robotics, Car and Motorcycle DC Motors, DC Motors in Industrial Machines, Water Dispensers,etc. We have sourced the best switch with a high load rating of 16A at 250VAC which should be suitable for most applications.

Features:

Positions Marked on the rocker: I, O, II (On, Center and Off) for easy identification
Panel Cut-Out:27mm x 21mm
Overall Dimensions: 35 x 33 x 25mm (Height x Length x Width)
Rating 15A 250VAC / 20A 125VAC
Weight : 12g
Package Content : 1 x DPDT Rock er Switch
Used widely for car, motorcycle, boat, some machines, water dispenser, etc.
Color : Black, Silver Tone
Material : Plastic & Metal
Mechanical Life: 50,000 Cycles
Electrical Life: 10,000 Cycles
Contact Resistance: 50M Max
Insulation Resistance: 1000M Min

Yes! I am Interested

Breadboard 840 Point

REQUEST CALLBACK

Get Best Quote

Approx. Rs 85 / PieceGet Latest Price

The breadboard includes one Terminal Strip with 640 Tie-points and 2 Distribution Strips with 200 Tie-points.The body is made of ABS plastic material.The board is completely reusable and enables easy component placement. other feature is that, the breadboard possesses Phosphor bronze nickel plated spring clips. Also the board facilitates the accept of variety of wire sizes. All these makes the design process easy and changes can be made on the circuits very quickly. Also it is simple to combine other breadboards.

Features

3M double sided sticky tape on back to attach to your circuit board of choice
Large working area
Rows are connected in sets of five
Middle divider separates board, for plugging in ICs
The breadboard can be broken into parts easily

Yes! I am Interested

Breadboard 170 Point

REQUEST CALLBACK

Get Best Quote

Approx. Rs 40 / PieceGet Latest Price

This is mini solderless prototype breadboard 170 points for Arduino shield.

Features:

Material: ABS
Mini Solderless Breadboard
Tie-point: 170
Completely reusable
Coloured coordinates for easy component placement
Color : Red, Black, White, Blue, green
Size:45x34x9mm(1.771.34x0.35 inch)

Yes! I am Interested

Breadboard 400 Point

REQUEST CALLBACK

Get Best Quote

Approx. Rs 60 / PieceGet Latest Price

Solderless breadboards are commonly used for prototyping because they allow you to quickly build temporary circuits without soldering. Breadboards accept most through-hole parts and up to #22 wire. When you’re done or want to change your circuit, it’s easy to take your circuit apart. For best results, use solid wires when breadboarding; you’ll find pre-cut jumper wire kits and premium jumper wires especially convenient.

Two sides of the breadboard have tabs and the other two sides have compatible slots, which lets you connect multiple 400-point breadboards for more prototyping space.

Yes! I am Interested

HCSR -04 Ultrasonic Case

REQUEST CALLBACK

Ask for Price

Product Price :Get Latest Price

Product Details:

Brand	Micron
Current (A)	15mA
Ranging Distance	2cm-4m
Case Material	Plastic

We are the leading supplier of HCSR -04 Ultrasonic Case made available to our clients at competitive prices.

Case to protech hcsr04 from any damage

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Delivery Time: 2-3 days

Yes! I am Interested

Spur Gear

REQUEST CALLBACK

Get Best Quote

Approx. Rs 35 / PieceGet Latest Price

Product Details:

No of Teeths	25
Diameter	40 mm
Center Shaft Diameter	6 mm
Teeth Face Width	12.5 mm

This 25T gear is a rotating machine part having cut teeth which mesh with another toothed part in order to transmit torque, in most cases with teeth on the one gear of identical shape, and often also with that shape on the other gear.

Yes! I am Interested

Worm Gear

REQUEST CALLBACK

Get Best Quote

Approx. Rs 35 / PieceGet Latest Price

We are the leading supplier for worm Gear.

Features:

6MM Motor Shaft Diameter
Pitch Diameter 40mm
Length 32mm
Screw Mountable with threaded metal
Yellow Color

Yes! I am Interested

Membrane Keypad 4 x 4

REQUEST CALLBACK

Get Best Quote

Approx. Rs 90 / PieceGet Latest Price

His slim, 16-button keypad provides a useful human interface component for microcontroller projects. Convenient adhesive backing provides a simple way to mount the keypad in a variety of applications. It is well-supported for use with the Propeller microcontroller by BlocklyProp blocks and projects, as well as a C library and tutorial; see the links under Additional Resources.

Features:

Ultra-thin design & adhesive backing provides easy integration to any project
Easy communication with any microcontroller
Cable included

Yes! I am Interested

Membrane Keypad 4 x 3

REQUEST CALLBACK

Get Best Quote

Approx. Rs 80 / PieceGet Latest Price

12 Key - 4x3 Matrix - Membrane Type Keypad.

Features:

4 x 3 Matrix Membrane Keypad
7 pin connector
Adhesive mounting (sticker on the back side)
Operation Temperature: 0 to +60 centigrade
Humidity: 40 centigrade, 90%-95%, 240 hours
Flexible Circuit Length: Approx. 3.3 inch / 83 mm

Yes! I am Interested

BO Gripper

REQUEST CALLBACK

Get Best Quote

Approx. Rs 430 / PieceGet Latest Price

Acrylic Gripper module is shape of robotic arm that can be used for building various pick and place robots. The module works with a 9V to 12V DC Motor. Polarity changes in input to the DC Motor motor, generates the action of gripper open & close. Using DPDT – Double Pole Double Throw Switch the gripper can be controlled manually or with the help of Microcontroller and Motor driver it can be programmed to perform the action of open and close. The Acrylic Gripper is one of the low cost modules available to perform pick and place robot.

Yes! I am Interested

Breadboard Wire Bundle

REQUEST CALLBACK

Get Best Quote

Approx. Rs 65 / StripGet Latest Price

Description:
65 flexible stranded core wires with stiff ends molded on in red, orange, yellow, green, blue, brown, black and white. These are a major improvement over the "box of bent wires" that are sometimes sold with breadboards, and faster than stripping your own solid core wires. Makes breadboarding super fast.
Features:

Approximately 65 wires in a mix of colors
48 short wires 4.5" (120mm) long
8 medium wires 5.5" (150mm) long wires
4 long 7.5" (190mm) long wires
4 x-tra long 10" (250mm) long wires

Technical Specifications:

Made from insulated 22AWG solid copper wire
Fitted with plugs that fit the connectors in the breadboard without damage
Assorted colours for easy identification components to simply be plugged into the board
Assorted length

Additional Information: