Approx. Rs 250 / PieceGet Latest Price
Product Details:Type | TEC1-12705 |
Couples | 127 |
Imax | 5A |
Umax | 15.4 V |
Qcmax | T=0(W): 42.5w |
Tmax | 65degC |
Size | 40 x 40 x 3.8mm |
Additional Information:
Approx. Rs 450 / PieceGet Latest Price
Product Details:Size | 40 mm x 40 mm |
Open Circuit Voltage | 9.4 volts |
Matched load output resistance | 2.8 ohms |
Matched load output voltage | 4.7 volts |
Matched load output current | 1.56 amperes |
Power | 7.3 W |
Heat flow through the module | About 133 watts |
Heat Flux | About 8.3 watts/cm2 |
Additional Information:
Approx. Rs 250 / PieceGet Latest Price
Product Details:Model No | TEC1-12706 |
Size | 40mm x 40mm |
Operates from | 0~15.2V and 0~6A |
Operates Temperature | -30C to 70C |
Max power consumption | 60 W |
Additional Information:
Approx. Rs 1 / NumberGet Latest Price
Product Details:Minimum Order Quantity | 1 Number |
Brand | Micron |
Color | Red |
Working Frequency | 50 Hz |
Power Source | Electric |
The module is based on a touch-sensing IC (TTP223B) capacitive touch switch module. In the normal state, the modules output is low, lower power consumption; When a finger touches the corresponding position, the modules output is high, if not touched for 12 seconds, it switches to low-power mode. Jog type : the initial state is lower , higher touch , do not touch is lower ( similar touch of a button feature )
This Module can be installed in such as surface plastic, glass of non-metallic materials.In addition to the thin paper ( non-metallic ) covering the surface of the module , as long as the correct location of the touch , you can make hidden in the walls, desktops and other parts of buttons.
Features
Additional Information:
Approx. Rs 130 / PieceGet Latest Price
We are the leading suppliers for DS18B20 Module. The 3-wire digital temperature sensor is fairly precise (±0.5°C over much of the range) and can give up to 12 bits of precision from the onboard digital-to-analog converter. It work's great with any microcontroller using a single digital pin, and you can even connect multiple ones to the same pin, each one has a unique 64-bit ID burned in at the factory to differentiate them. Usable with 3.0-5.0V systems
Additional Information:
Approx. Rs 180 / NumberGet Latest Price
This is a BH1750 light intensity sensor breakout board with a 16 bit AD converter built-in which can directly output a digital signal, there is no need for complicated calculations. This is a more acurate and easier to use version of the simple LDR which only outputs a voltage that needs to be calculated in order to obtain meaningful data. With the BH1750 Light Sensor intensity can be directly measured by the luxmeter, without needing to make calculations. The data which is output by this sensor is directly output in Lux (Lx). When objects which are lighted in homogeneous get the 1 lx luminous flux in one square meter ,their light intensity is 1lx. Sometimes to take good advantage of the illuminant, you can add a reflector to the illuminant.So that there will be more luminous flux in some directions and it can increase the ilumination of the target surfaceFeatures
Approx. Rs 1 / NumberGet Latest Price
Feature: The body that can be used to measure the electrical activity of the skin (EDA), also known as the galvanic skin response (GSR). EDA is actually a characteristic of the human body that leads to continuous changes in the electrical properties of the skin. EDA monitoring is usually combined with monitoring of heart rate, respiratory rate, and blood pressure to fully understand some parameters of the human autonomic nervous system. EDA measurements are an integral part of modern lie detectors and are often used as lie detectors. GSR clicks are ideally suited as an experimental tool for research, as well as for establishing effective test applications based on EDA reactions - such as polygraphs. MCP607 2.5V to 6.0V Micropower CMOS Op Amp, MCP3201 2.7V 12-Bit A/D Converter with SPI Serial Interface, MCP1541 2.5V, and 4.096V The click features a precise 12bit AD converter so that the measured data can be digitally processed by the MCU via the SPI, it also outputs buffered analog signal for further processing (analog or digital)
Additional Information:
Approx. Rs 1 / NumberGet Latest Price
A breakout board / module for the MPU9250 9-axis (9DOF) accelerator, gyroscope, and digital compass (magnetometer) I.C (HCMODU0092). The MPU-9250 is a multi-chip module (MCM) consisting of two dies integrated into a single QFN package. One die houses the 3-Axis gyroscope and the 3-Axis accelerometer. The other die houses the AK8963 3-Axis magnetometer from Asahi Kasei Microdevices Corporation. Hence, the MPU-9250 is a 9-axis Motion Tracking device that combines a 3-axis gyroscope, 3-axis accelerometer, 3-axis magnetometer and a Digital Motion Processor™ (DMP) all in a small 3x3x1mm package available as a pin-compatible upgrade from the MPU-6515. With its dedicated I2C sensor bus, the MPU-9250 directly provides complete 9-axis MotionFusion™ output. The MPU-9250 Motion Tracking device, with its 9-axis integration, on-chip MotionFusion™, and run-time calibration firmware, enables manufacturers to eliminate the costly and complex selection, qualification, and system level integration of discrete devices, guaranteeing optimal motion performance for consumers. MPU-9250 is also designed to interface with multiple non-inertial digital sensors, such as pressure sensors, on its auxiliary I2C port. MPU-9250 features three 16-bit analog-to-digital converters (ADCs) for digitizing the gyroscope outputs, three 16-bit ADCs for digitizing the accelerometer outputs, and three 16-bit ADCs for digitizing the magnetometer outputs. For precision tracking of both fast and slow motions, the parts feature a user programmable gyroscope full-scale range of ±250, ±500, ±1000, and ±2000°/sec (dps), a user programmable accelerometer full-scale range of ±2g, ±4g, ±8g, and ±16g, and a magnetometer full-scale range of ±4800µT. Other industry-leading features include programmable digital filters, a precision clock with 1% drift from -40°C to 85°C, an embedded temperature sensor, and programmable interrupts.
Module Specification:
Item number: HCMODU0092
Supply voltage: 5V (on-board 3.3V regulator)
Interface: I2C
Dimensions: 26mm x 15mm
Accelerometer Features:
The triple-axis MEMS accelerometer in MPU-9250 includes a wide range of features:
• Digital-output triple-axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g and ±16g and integrated 16-bit ADCs
• Accelerometer normal operating current: 450µA
• Low power accelerometer mode current: 8.4µA at 0.98Hz, 19.8µA at 31.25Hz
• Sleep mode current: 8µA
• User-programmable interrupts
• Wake-on-motion interrupt for low power operation of applications processor
• Self-test 2.3 Magnetometer Features The triple-axis MEMS magnetometer in MPU-9250 includes a wide range of features:
• 3-axis silicon monolithic Hall-effect magnetic sensor with magnetic concentrator
• Wide dynamic measurement range and high resolution with lower current consumption.
• Output data resolution of 14 bit (0.6µT/LSB) or 16 bit (15µT/LSB)
• Full scale measurement range is ±4800µT
• Magnetometer normal operating current: 280µA at 8Hz repetition rate
• Self-test function with internal magnetic source to confirm magnetic sensor operation on end products
Additional Information:
Product Price :Get Latest Price
Product Details:Battery Type | CR2032 (update on October 25th) |
Weight (Kilogram) | 8 g |
Operating voltage (Volt) | 3.3 - 5.5 |
Size | 38mm (length) x 22mm (Width) x 14mm (height) |
Additional Information:
Product Price :Get Latest Price
Product BrochureProduct Details:Circuit voltage | 5 V +/ -0.1 |
Preheat Duration | Over 24 hour |
Heater resistance | 31 ohm +/- 10% |
Related humidity | 0-95%Rh |
This MQ-5 Methane LPG Liquid Propane Gas Sensor Module is widely used in gas leakage detecting pieces of equipment in family and industry, are suitable for detecting of LPG, natural gas, town gas, avoid the noise of alcohol and cooking fumes and cigarette smoke
The MQ5 ( MQ-5 ) is used in gas leakage detecting equipment in consumer and industry applications, this sensor is suitable for detecting LPG, natural gas, coal gas. Avoid the noise of alcohol, cooking fumes, and cigarette smoke. The sensitivity can be adjusted by the potentiometer.
Sensitive material of MQ-5 gas sensor is SnO2, which with lower conductivity in clean air. When the target combustible gas exists, The sensor’s conductivity is higher along with the gas concentration rising. Please use simple electro circuit, Convert change of conductivity to the corresponding output signal of gas concentration.
MQ-5 gas sensor has high sensitivity to Methane, Propane, and Butane, and could be used to detect both Methane and Propane. The sensor could be used to detect different combustible gas especially Methane, it is with low cost and suitable for different application
Features :
Additional Information:
Product Price :Get Latest Price
The QTR-8RC reflectance sensor array is intended as a line sensor, but it can be used as a general-purpose proximity or reflectance sensor
Additional Information:
Product Price :Get Latest Price
Product BrochureESCRIPTIONThis sensor will measure the filtered and rectified electrical activity of a muscle, depending on the amount of activity in the selected muscle area.
By detecting the electromyogram (EMG), measuring muscle activity has traditionally been used in medical research, however with shrinking but more powerful microcontrollers and integrated circuits Tomson Electronics EMG power Rod and sensors can be used for various control systems and DIY Robotics activities.
The sensor will measure the electrical activity of the muscle output 0-5 Vs volts, the output size to take Depending on the amount of muscle activity is selected.
Additional Information:
Product Price :Get Latest Price
Line Tracking SensorThe Line Tracking Sensor based on TCRT5000 from Vishay is an type of infrared reflectance sensor, and is commonly used in line following robots, it is mounted at the bottom of the robot chassis. The line tracking sensor works by detecting reflected light coming from its own infrared LED and by measuring the amount of reflected infrared light, it can detect transitions from light to dark (lines) or even objects directly in front of it.
Features :
Additional Information:
Product Price :Get Latest Price
This sensor is widely used in motor speed detection, pulse count, the position limit, etc. The DO output interface can be directly connected to a micro-controller IO port, if there is a block detection sensor, such as the speed of the motor encoder can detect. DO modules can be connected to the relay, limit switch, and other functions, it can also with the active buzzer module, compose alarm.
Features:
Pinouts:
Additional Information:
Product Price :Get Latest Price
Product Details:Detection Area | 40mmx16mm |
Operating Voltage | DC3-5V |
Operating Current | Less than 20mA |
Sensor Type | Analog |
Humidity | 10% -90% non-condensing |
Dimension | 62mmx20mmx8mm |
Additional Information:
Approx. Rs 70 / PieceGet Latest Price
Product BrochureProduct Details:Model / Part Number | MQ-2 |
Target gases | LPG,Propane and Hydrogen |
Operating Voltage | 24V |
Preheat Duration | Over 48 hours |
Material | Bakelite |
Humidity | 65%+-5%RH |
Sensing Resistance | 2K ohm-20K ohm |
Additional Information:
Approx. Rs 100 / PieceGet Latest Price
Product Details:Divider Ratio | 5:1 |
Resistor Tolerance | 1% |
Max Input Voltage | 25 V |
Resistor Value | 30K/7.5K Ohm |
Product Price :Get Latest Price
Product Details:Power | 2.5V ~ 5.0V |
Dimension | 40.0mm * 21.0mm |
Mounting holes size | 2.0 mm |
Additional Information:
Approx. Rs 160 / PieceGet Latest Price
Product BrochureCable float switch is suitable for use in non-flammable liquids at 250 volts. The Device is connected to an electrical pump through an electrical cabe, is used for the auto control and no water protection of the water tower and water pool.
Additional Information:
Product Price :Get Latest Price
The DHT21 digital temperature sensor is one of the commonest from the range of DHT temperature sensors and boasts a relatively high temperature measurement accuracy of 0.5oC in 0.1oC steps with a relative humidity accuracy of +/- 3%. It has only 3 wires, including power and ground, meaning only one digital pin is required to interface it to a microcontroller.
Additional Information:
Product Price :Get Latest Price
Features:
Additional Information:
Product Price :Get Latest Price
Description :
Additional Information:
Product Price :Get Latest Price
The MCP4725 is an I2C controlled Digital-to-Analog converter (DAC). A DAC allows you to send analog signal, such as a sine wave, from a digital source, such as the I2C interface on the Arduino microcontroller.This version of the MCP4725 Breakout fixes a few issues with the board including the IC footprint, the I2C pinout, changes the overall board dimensions to better fit your projects, and a few more minor tweaks. This board breaks out each pin you will need to access and use the MCP4725 including GND and Signal OUT pins for connecting to an oscilloscope or any other device you need to hook up to the board. Also on board are SCL, SDA, VCC, and another GND for your basic I2C pinout.
Additional Information:
Approx. Rs 100 / PieceGet Latest Price
Product Details:Working life | more than 2000 hours |
Shell material | Brass |
Single weight | 1 g |
Spot mode | Dot facula, continuous output |
Laser wavelength | 650nm (red) |
Copper head diameter | 6 mm |
Light power | better than 5m W |
Supply voltage | 5V DC |
Operating current | Better than 40mA |
Operating temperature | -36V ~ 65V |
Power lead length | 120 mm |
Additional Information:
Approx. Rs 250 / PieceGet Latest Price
Product Details:Max Voltage | Less than 100VDC |
Max Current | Less than 500mA |
Max Rating | Less than 10W |
Gap | 20+-5 mm |
Contact Mode | No |
Size | 34 x 41 x 6.5 mm |
Approx. Rs 220 / PieceGet Latest Price
Product Details:Interface | 3V3/5V Microcontroller |
Voltage | 3-6V DC |
Output Format | Analog output |
Measuring Range | +-3g |
Measuring Value | X(+325 to -274), Y(+330 to -275), Z (+310 to 275) |
Product Price :Get Latest Price
Product BrochureProduct Details:Model / Part Number | MQ-135 |
Target gases | NH3,NOx,alcohol,Benzene,smoke,CO2 |
Operating Voltage | 5V |
Operating Humidity | 0- 95%RH |
Preheat Duration | Over 24 hour |
Heater resistance | 33 ohm +/-5% |
Circuit voltage | 5V+/-0.1 |
It is a hazardous gas detection apparatus for the family, the environment, suitable for ammonia, aromatic compounds, sulphur, benzene vapour, smoke and other gases harmful gas detection, gas-sensitive element test.
Air quality sensor is for detecting a wide range of gases, including NH3, NOx, alcohol, benzene, smoke and CO2. Ideal for use in office or factory with simple drive and monitoring circuit.
Features
Additional Information:
Product Price :Get Latest Price
Product Details:Minimum Order Quantity | 1 Number |
Model / Part Number | MQ-3 |
Target gases | Ethanol Vapour |
Measuring Range | 20-10,000 ppm |
Operating Voltage | 5V |
Output Current ( in mA) | 150 mA |
Operating Humidity | 0-95%RH |
Response Time | <=1 sec |
Preheat Duration | Over 24 hrs |
Operating Temperature | -10 DegreeC ~ 70 DegreeC |
Additional Information:
Approx. Rs 160 / NumberGet Latest Price
Product Details:Minimum Order Quantity | 50 Number |
Supply Voltage | 4.5V~5.5V DC |
Measure Current Range | -20A, 5A And 30A |
Sensitivity | 100mV/A |
Additional Information:
Approx. Rs 100 / PieceGet Latest Price
We are the leading suppliers for TTP 223B Touch Thumb Sensor. This is a simple touch sensor module. You can use it to replace a traditional push button. Using the TTP223 touch detector IC It measures the capacitance of a metallic pad. It can detect the change in capacitance when a finger is near it. This is the same technology used in the iPhone touch screen.This little sensor can "feel" people and metal touch and feedback a high/low voltage level. Even isolated by some cloth and paper, it still can feel the touch. And the sensitivity well decrease as isolation get thick.Approx. Rs 150 / NumberGet Latest Price
The ADXL345 is a small, thin, ultralow power, 3-axis accelerometer with high resolution (13-bit) measurement at up to +-16 g. Digital output data is formatted as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface. The ADXL345 is well suited for mobile device applications.
Additional Information:
Approx. Rs 100 / PieceGet Latest Price
We are the leading suppliers for DS 1307 Real Time Module (RTC). The module based on DS1307, The DS1307 serial real-time clock (RTC) is a low-power, full binary-coded decimal (BCD) clock/calendar plus 56 bytes of NV SRAM. Address and data are transferred serially through an I²C, bidirectional bus. The clock/calendar provides seconds, minutes, hours, day, date, month, and year information. The end of the month date is automatically adjusted for months with fewer than 31 days, including corrections for leap year. The clock operates in either the 24-hour or 12-hour format with AM/PM indicator. The DS1307 has a built-in power-sense circuit that detects power failures and automatically switches to the backup supply. Timekeeping operation continues while the part operates from the backup supply.
Additional Information:
Approx. Rs 100 / PieceGet Latest Price
This precision sensor is the best low-cost sensing solution for measuring barometric pressure and temperature. Because pressure changes with altitude you can also use it as an altimeter! The sensor is soldered onto a PCB with a 3.3V regulator, I2C level shifter and pull-up resistors on the I2C pins.
Additional Information:
Approx. Rs 150 / PieceGet Latest Price
Bosch has stepped up their game with their new BMP280 sensor, an environmental sensor with temperature, barometric pressure that is the next generation upgrade to the BMP085/BMP180/BMP183. This sensor is great for all sorts of weather sensing and can even be used in both I2C and SPI.
Feature:
Additional Information:
Approx. Rs 1 / NumberGet Latest Price
The vibration sensing system of this product composed of the buzzing and the contact spring, which has the characteristics of high sensitivity, high speed and high performance. Piezoelectric ceramic spring hammer structure vibration signals detection, and through the LM358 OP AMP and outputs the control signal, it is low cost, high sensitivity, stable and reliable. Vibration detection can be controlled in a wider range, has been widely applied to automobile, motorcycle anti-theft system, the vehicle alarm is 80% with this kind of sensor. The sensor can also be used with MCU, wireless transmitting module, wired alarm etc. They are widely used in automobile anti-theft and other security products.Features:
Additional Information:
Product Price :Get Latest Price
Description:
Additional Information:
Product Price :Get Latest Price
Description:
Additional Information:
Product Price :Get Latest Price
MPR121 Breakout Board
Additional Information:
Approx. Rs 350 / PieceGet Latest Price
Product Details:Working voltage | 4.5 to 5.5V |
Launch tube pressure drop | Vf=1.6V |
Launch tube current | If better than 20mA |
Signal output | A, B two lines |
Resolution | 0.01 mm |
Measurement frequency | 100 KHz |
Disc diameter | 24 mm |
Encoder resolution | 20 lines |
Dimension | 0.87 in x 1.02 in x 0.55 in (2.2 cm x 2.6 cm x 1.4 cm) |
Explore More Products
© Micron. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited