Approx. Rs 100 / PieceGet Latest Price
Product Details:Connectivity Type | Radio frequency |
PA Gain | 20dB |
LNA Gain | 10dB |
LNA noise figure | 2.6dB |
Antenna Gain Peak | 2dBI |
Size | 45.54mm x 16.46mm |
Voltage | 3-3.6V (3.3V best) |
Maximum Output Power | +20dBm |
Transmission Current Peak | 115mA |
Receiving Current Peak | 45mA |
Power Down Current | 4.2uA |
Operating Temperature | -20~70C |
Receive TwoMbps mode | -92dBm |
Receive OneMbps mode | -95dBm |
Additional Information:
Approx. Rs 300 / PieceGet Latest Price
Product Details:Frequency Range | 433MHz |
Voltage | 5 V |
Output Mode | Momentary |
Power Consumption | 5mA |
Receiving Sensitivity | -101 dbm |
Output PINs | GND, 5V, D0, D1, D2, D3, VT (Status LED) |
Dimension | 41 mm x 22 mm x 6 mm |
Approx. Rs 150 / PieceGet Latest Price
Product Details:Frequency | 434 |
Range in open space | 100 mtr |
RX Receiver Frequency | 433 MHz |
RX Typical Sensitivity | 105 Dbm |
RX Supply Current | 3.5 mA |
RX IF Frequency | 1 MHz |
RX Operating Voltage | 5V |
TX Frequency Range | 433.92 MHz |
TX Supply Voltage | 3V ~ 6V |
TX Out Put Power | 4 ~ 12 Dbm |
This 434MHz Transmitter is an ASK Hybrid transmitter module. It uses saw resonator for frequency stability. The receiver is an ASK super heterodyne receiver with PLL synthesizer and crystal oscillator.
This transmitter and receiver in conjunction with HT12E and HT12D ICs can be used to build remote control
Features
Additional Information:
Approx. Rs 350 / PieceGet Latest Price
Product Details:Power Supply | 3.3V to 5V |
Transmission Rate | 6K Bytes / sec (asynchronous & synchronous) |
Supported baud rate | 1200, 2400, 4800, 9600 (default), 19200,38400, 57600, 115200, 230400 |
RF Power | -23dbm, -6dbm, 0dbm, 6dbm (modify through AT Command AT+POWE) |
Use | 50-200uA when asleep |
Default Pin Code | 000000 |
Default Name | HMSoft |
Approx. Rs 30 / PieceGet Latest Price
Product Details:Frequency | 125KHz |
Size | 85 x 55 x 0.8 mm |
Material | PVC |
Color | White |
Standard | EM4100 compatible |
Temperature | -40deg C to 85degC |
Additional Information:
Approx. Rs 300 / PieceGet Latest Price
Product Details:Voltage | 3-3.6V |
LAN noise figure | 2.6dB |
Antenna growth | 2dBI |
TwoM rate | 520m |
Max Output Power | +20 dBm |
Working current in transmit mode | 115mA |
Working current in receiver mode | 45mA |
Current in mode | 4.2uA |
Operating Temperature | -20-70 degree |
Receiver Sensitivity | -92dBm in 2Mbps mode, -95dBm in 1Mbps mode, -104dBm in 250kbps mode |
PA growth | 20dB |
LAN growth | 10dB |
Approx. Rs 700 / PieceGet Latest Price
Product Details:Channels | 4 |
Operating Voltage | DC12V |
Max Load | 7A |
Operating Frequency | 433 Mhz |
Receiver Sensitivity | -100dBm |
Encoding Type | Learning code |
PCB Size | 35*32*17mm L x W x H |
Remote Control Size L x W x H | Approx. 55 x 30 x 13mm (2.2 x 1.2 x 0.5 inch) |
Additional Information:
Approx. Rs 500 / PieceGet Latest Price
Product Details:Channels | 1 |
Frequency | 433 MHz |
Operating Voltage | DC12V |
Max Load | 7A |
Receiver Sensitivity | -100 dBm |
Encoding Type | Learning code |
PCB Size | 35*32*17mm L x W x H |
Remote Control Size L x W x H | Approx. 55 x 30 x 13mm (2.2 x 1.2 x 0.5 inch) |
Additional Information:
Approx. Rs 1,100 / PieceGet Latest Price
Product Details:Channels | 8 |
Frequency | 433 MHz |
Operating Voltage | DC12V |
Max Load | 7A |
Receiver Sensitivity | -100 dBm |
Encoding Type | Learning code |
Additional Information:
Approx. Rs 300 / PieceGet Latest Price
Product Details:Operating Current | 13-26mA / DC 3.3V |
Reader Distance | 50mm / 1.95" (mifare 1) |
Module Size | 40mm x 60mm |
Module Interface | SPI |
Data Transfer Rate | Maximum 10Mbit/s |
Idle Current | 10-13mA / DC 3.3V |
Sleep Current | Better than 80uA |
Peak Current | Better than 30mA |
Operating Frequency | 13.56MHz |
Supported card types | Mifare1 S50, mifare1 S70 MIFARE Ultralight, mifare Pro, MIFARE DESFire |
Environmental Operating Temperature | -20 - 80 degrees Celsius |
Environmental Storage Temperature | -40 - 85 degrees Celsius |
Relative Humidity | Relative humidity 5% - 95% |
Additional Information:
Approx. Rs 250 / PieceGet Latest Price
Product Details:Sensor Type | Accelerometer,Gyroscope,3-axis |
Sensing Range | +/-2g,+/-4g,+/-8g,+/-16g,+/-2500/s,+/-5000/s,+/-10000/s,+/-20000/s |
Interface | I2C Digital |
Voltage Supply | 3 V ~ 5 V |
Axis | 6 Axis |
Utilized IC | MPU6050 |
Operating Temperature | - 400 C ~ 850 C |
Compliance | RoHs |
Additional Information:
Approx. Rs 260 / PieceGet Latest Price
Product Details:USB | Micro USB port for power, programming and debugging |
Headers | 2x 2.54mm 15-pin header with access to GPIOs, SPI, UART, ADC, and power pins |
Misc | Reset and Flash buttons |
Power | 5V via micro USB port |
Dimension | 49 x 24.5 x 13mm |
Additional Information:
Approx. Rs 600 / PieceGet Latest Price
Product Details:Channel | 2 |
Operating Voltage | DC12V |
Maximum Load | 7A |
Operating Frequency | MHz |
Receiver Sensitivity | -100 dBm |
Additional Information:
Approx. Rs 200 / PieceGet Latest Price
Product Details:Dimension | 25 x 15 x 11 mm (LxWxH) |
PCB Thickness | 1 mm |
Weight | 2 gm |
Additional Information:
Approx. Rs 250 / PieceGet Latest Price
We are the leading suppliers for Bluetooth Module HC 05. HC‐05 module is an easy to use Bluetooth SPP (Serial Port Protocol) module,designed for transparent wireless serial connection setup.The HC-05 Bluetooth Module can be used in a Master or Slave configuration, making it a great solution for wireless communication.This serial port bluetooth module is fully qualified Bluetooth V2.0+EDR (Enhanced Data Rate)3Mbps Modulation with complete 2.4GHz radio transceiver and base band. It uses CSR Bluecore 04‐External single chip Rluetooth system with CMOS technology and with AFH (Adaptive Frequency Hopping Feature).
Additional Information:
Approx. Rs 400 / PieceGet Latest Price
We are the leading suppliers for Wireless Motor Control Board. the Wireless Motor Control board controls 2 DC motors wirelessly using an rf receiver and remote. The board has voltage control, motor driver and rf receiver circuitry inbuilt. It has LED indicators for both power supply and signal reception. An on/off switch in provide for easy of control. PTR connector provided here are ideal for motor connections. Use this module for easy motor control that too wirelessly .
Additional Information:
Approx. Rs 40 / PieceGet Latest Price
We are the leading suppliers for RFID Keychain 125khz & 13.56 Khz. This is a basic RFID Tag Keyfob used for presence sensing , Access control etc. Works in the 125kHz RF range. These tags come with a unique 32-bit ID and are not re-programmable. Tag is blank, smooth, and mildly flexible.
Additional Information:
Approx. Rs 230 / PieceGet Latest Price
We are the leading suppliers for NodeMCU ESP-8266 WIFI Board CH340. NodeMcu ESP8266 V3 Lua CH340 Wifi Dev. Board is a fast leading edge low-cost WiFi technology. Modern high-level mature LUA based technology. It is an integrated unit with all available resources on board. It is super simple to complement your existing Arduino projects or any development board that has I/O pins available.
Additional Information:
Approx. Rs 200 / PieceGet Latest Price
Product Details:Operating Voltage | 3.3V |
Approx. Rs 200 / PieceGet Latest Price
We are the leading traders for ESP 8266 - 12E. ESP8266 ESP-12E ESP 12E Wireless WIFI Module 3.3V With Extra 6 IO SPI Compatible for Arduino
Additional Information:
Product Price :Get Latest Price
The RX – ASK is an ASK Hybrid receiver module. It is a effective low cost solution for using 433 MHz. The TX-ASK is an ASK hybrid transmitter module. TX-ASK is designed by the saw resonator, with an effective low cost, small size and simple to use for designing.
Please note that this device will not support direct UART communication when connected to PC or microcontrollers as there is a lot of noise always available on these frequencies. If you are looking for Serial Communication see RF 2.4Ghz Serial Link instead of this product. We will not be providing any support for serial communications after sales. For remote control applications please use Encoder and Decoder ICs.
Features
Additional Information:
Product Price :Get Latest Price
Product Details:Frequency | 125 KHz |
Power Supply | -9-12v AC/DC |
Current | Better than 50mA |
Read Distance | 10 cm |
Size of RFID reader module | 32mm(length) * 32mm(width) * 8mm(height) |
Product Price :Get Latest Price
Product Details:Minimum Order Quantity | 50 Piece |
Frequency | 125 KHz |
Current | Better than 50mA |
Read Distance | 10 cm |
Size of RFID reader module | 32mm(length) * 32mm(width) * 8mm(height) |
Product Price :Get Latest Price
The module has the ability to run independent of a host controller.
The ESP8266 Serial/UART to WiFi module is a great way to connect your Arduino or other microcontroller projects to a WiFi network.
Create your next internet of things (IOT) project with affordable network connectivity by implementing this module into your design.
The ESP8266 has 3.6V max tolerant I/Os so you will need a logic level converter to connect it with higher voltage devices such as Arduino.
The ESP8266 requires 3.3V power so you may need a 3.3V voltage regulator to provide the correct voltage, depending on your setup.
Specifications:
Additional Information:
Product Price :Get Latest Price
HC-06 Bluetooth Module with BaseThe HC06 is a Serial port Bluetooth module which having fully qualified Bluetooth V2.0+EDR (Enhanced Data Rate) 3Mbps Modulation with complete 2.4GHz radio transceiver and baseband. It uses CSR Blue core 04‐External single chip Bluetooth system with CMOS technology and with AFH (Adaptive Frequency Hopping Feature).
Features of HC-06 Bluetooth Module with Base.
Additional Information:
Product Price :Get Latest Price
SP32 is a single chip 2.4 GHz Wi-Fi and Bluetooth combo chip designed with TSMC ultra low power 40 nm technology. It is designed and optimized for the best power performance, RF performance, robustness, versatility, features and reliability, for a wide variety of applications, and different power profiles.
ESP32 is the most integrated solution for Wi-Fi + Bluetooth applications in the industry with less than 10 external components. ESP32 integrates the antenna switch, RF balun, power amplifier, low noise receive amplifier, filters, and power management modules. As such, the entire solution occupies minimal Printed Circuit Board (PCB) area.
ESP32 is designed for mobile, wearable electronics, and Internet of Things (IoT) applications. It has many features of the state-of-the-art low power chips, including fine resolution clock gating, power modes, and dynamic power scaling.
Specification:
Additional Information:
Product Price :Get Latest Price
NFC (Near Field Communication, NFC), also known as the short-range wireless communication, high frequency wireless communication technology is a short-range, allowing for non-contact-point data transfer between the electronic device (within ten centimeters) to exchange data . The technology consists of a contact-free radio frequency identification (RFID) evolved, backward compatible RFID, first developed by Sony and Philips each success, mainly for mobile phones and other handheld devices to provide M2M (Machine to Machine) communication. Because of the near-field communication has a natural safety, therefore, NFC technology is considered in areas such as mobile payment has great application prospects. Meanwhile, NFC because it compared to other wireless communication technology security is better networking between schools and enterprises Chinese objects alliance as a "security dialogue" between the machines.
Features:
Additional Information:
Product Price :Get Latest Price
ESP32 is the big brother of ESP8266. It comes with dual core 32-bit processor, built-in WiFi and Bluetooth, more RAM and Flash memory, more GPIO, more ADC, and many other peripherals :)NodeMCU ESP32 is ESP-WROOM-32 module in breadboard friendly form factor, you can develop your project in using this compact microcontroller on breadboard.
Features:
Additional Information:
Approx. Rs 200 / PieceGet Latest Price
Product Details:Voltage (V) | DC12V ( 27A/12V a battery) |
Size | 6.6 * 22 * 41mm |
Operating Current | 10mA _AT_ 12V |
Radiated Power | 10mw _AT_ 12V |
Modulation | ASK (Amplitude Modulation) |
Transmitter Frequency | 315MHZ |
Transmission Distance | 1 M |
Encoder Types | Fixed code |
Additional Information:
Approx. Rs 700 / PieceGet Latest Price
Allsen Rx – Tx Kit consists of a RF Transmitter and a Receiver. This kit is specially designed for using it in making wireless robots where one can press buttons provided on transmitter and move the robot in desired direction with a help of motors driven by motor driver circuit in receiver.Approx. Rs 1,000 / PieceGet Latest Price
We are the leading suppliers for Zigbee S2C. This is the XBee XB24-CZ7WIT-004 module Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
Additional Information:
Product Price :Get Latest Price
TM32F103C8T6 Small System Board Microcontroller STM32 ARM Core Board For Arduino
Additional Information:
Approx. Rs 350 / PieceGet Latest Price
This is a 4 bit wireless module. Use it to transmit and receive 4 bits of data through a wireless RF Link. It uses our 433 MHz RF Modules and the HT12E/D IC. The transmitter and the receiver come with a 8 bit address selector switch which can be used to assign unique addresses to each wireless link. Receivers receive data only from transmitters which have a matching 8 bit address. The module can operate within a range of 100m when the transmitter is in line of sight and around 50m when indoors.Explore More Products
© Micron. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited